Cameron & Co
Cameron & Co DS-CS-LTM610SL GPS battery Ni-MH 12.0V 9000mAh red
Ni-MH battery delivers 12.0 V and 9000 mAh for Leica GPS total stations and trackers
- TypeGPS Batteries
- 0 V 9000 mAh Ni-MH chemistry powers long survey sessions
- Direct replacement for Leica GEB171 part ensures exact fit
- Red housing matches original equipment for quick identification
- 108 Wh capacity supports extended field use without recharge
- 33 × 91.64 × 74.63 mm form factor slots into TM6100A and TDRA6000 units
Leica GPS battery replacement
This Cameron Sino DS-CS-LTM610SL battery replaces the Leica GEB171 pack for GPS total stations and theodolites. It delivers 12.0 V and 9000 mAh using nickel-metal hydride chemistry. The red casing matches the original equipment colour.
Upgrade from depleted GEB171 cells
The jump is worth it when the original pack no longer holds a full day's charge in the field. A fresh 108.00 Wh unit restores the runtime that survey crews expect from a TM6100A or Tracker TDRA6000. No adapter or firmware change is required.
Suits survey teams using Leica TM6100A or TDRA6000
Buyers who need a different voltage, a lithium chemistry or a connector layout not listed here should look elsewhere. This pack is built only for the models and part numbers shown in the compatibility list.
Highlights
- 0 V 9000 mAh Ni-MH chemistry powers long survey sessions
- Direct replacement for Leica GEB171 part ensures exact fit
- Red housing matches original equipment for quick identification
- 108 Wh capacity supports extended field use without recharge
- 33 × 91.64 × 74.63 mm form factor slots into TM6100A and TDRA6000 units
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-LTM610SL |
| Type | GPS Batteries |
Questions about this item
What are the exact dimensions of the 12.0V 9000mAh battery so I can confirm it fits my TM6100A?
The pack measures 204.33 x 91.64 x 74.63 mm and is built to match the original GEB171 form factor for the Leica TM6100A and TDRA6000.
How do I install the red Ni-MH pack in my Leica total station without damaging the contacts?
Power off the instrument, open the battery latch, align the pack using the keyed guide rails, press firmly until the latch clicks, then power on to verify the 12.0V reading.
When should I replace the 9 Ah Ni-MH battery and how do I know it is worn out?
Replace it when run-time drops well below the rated 108.00 Wh capacity or the unit shuts down early during field work; the red casing makes visual inspection easy.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HQRP 2-Pack 10 ft 2.1mm x 5.5mm DC Power Extension Cable + Coaster
- Black



