We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular Ni-MH battery pack 114.70 x 47.03 x 20.30 mm

Cameron & Co

Cameron & Co DS-CS-KUT271BL 4.8V 2000mAh Ni-MH standard battery

SKU CH-PMH2-C770P

4.8 V 2000 mAh Ni-MH replacement battery for IKUSI, Iribarri and KoneCranes transmitters and consoles

  • TypePower Tool
  • Direct replacement for IKUSI and Iribarri transmitters
  • 8 V Ni-MH chemistry delivers 2000 mAh capacity
  • Powers KONECRANES T70 and TM70 console boxes
  • 70 x 47.03 x 20.30 mm form factor fits battery bay
  • 100 % OEM compatible with part numbers 2305271 BT24IK BT27iK

Compatible IKUSI and Iribarri transmitters

This Cameron & Co Ni-MH battery replaces the original power pack for IKUSI BERLINDE GH, IK3, IK3 transmitters, IK4 and IKONTROL units. It also fits Iribarri iK3 and iK4 handsets as well as KONECRANES T70 console boxes and TM70 variants. The cell matches part numbers 2305271, BT24IK and BT27iK for direct drop-in installation.

Upgrade from depleted Ni-MH packs

The 4.8V 2000mAh rating restores full runtime when the original pack no longer holds a charge. Swapping is worthwhile when transmitter operating time has fallen below a full shift or when the pack shows physical swelling. No adapter or firmware change is required because the form factor and connector match the OEM design.

9.60 Wh capacity for extended shifts

At 9.60 Wh the pack delivers enough energy for long crane or industrial control sessions before recharge. The 114.70 x 47.03 x 20.30 mm footprint fits the existing battery bay without modification. Runtime will decrease in very cold environments or after many hundred charge cycles, at which point a fresh replacement is advised.

Highlights

  • Direct replacement for IKUSI and Iribarri transmitters
  • 8 V Ni-MH chemistry delivers 2000 mAh capacity
  • Powers KONECRANES T70 and TM70 console boxes
  • 70 x 47.03 x 20.30 mm form factor fits battery bay
  • 100 % OEM compatible with part numbers 2305271 BT24IK BT27iK

Specifications

BrandCameron Sino
ModelDS-CS-KUT271BL
TypePower Tool

Questions about this item

What are the 114.70 mm length and 20.30 mm thickness of this DS-CS-KUT271BL pack?

The battery measures 114.70 mm long, 47.03 mm wide and 20.30 mm thick, so the compartment must accept those exact dimensions.

Which step is often missed when fitting the pack into an IKUSI IK3 or IK4 transmitter?

Align the polarity tabs with the transmitter contacts before sliding the pack fully home; forcing it reversed bends the terminals.

How will I know the 4.8 V 2000 mAh Ni-MH cells need replacing?

When operating time on the T70 console falls to roughly half of the original 9.60 Wh capacity, the pack should be swapped.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.