Cameron & Co
Cameron & Co DS-CS-KLIC5001 camera battery Li-ion 3.7V 1400mAh 5.18Wh black
Lithium-ion camera battery rated at 3.7 V, 1400 mAh and 5.18 Wh, compatible with numerous Kodak EasyShare and Sanyo Xacti models
- TypeBattery
- Li-ion chemistry delivers reliable 3.7 V power
- 1400 mAh capacity supports extended shooting sessions
- 18 Wh energy rating meets original specifications
- Compatible with Kodak EasyShare and Sanyo Xacti models
- Compact 53.00 x 35.30 x 11.30 mm design fits original battery slots
Compatible camera battery
This lithium-ion pack replaces the KLIC-5001 cell used in Kodak EasyShare and Sanyo Xacti models. It fits cameras such as the DX6490, DX7440, P850, Z730 and the VPC-TH1 camcorder. The 3.7 V, 1400 mAh rating matches the original specification.
Steady discharge profile
Li-ion chemistry delivers a flat voltage curve so the camera meter remains accurate through a full shooting session. The 5.18 Wh capacity supports extended recording without the sudden drop-off seen in aged cells. No memory effect means partial recharges do not reduce usable runtime.
Slim black housing
The 53.00 x 35.30 x 11.30 mm case slides into the battery compartment without force or shims. Polarised contacts prevent reverse insertion and ensure reliable connection on every swap. The pack is sold as a single unit, ready for immediate use as a primary or spare power source.
Highlights
- Li-ion chemistry delivers reliable 3.7 V power
- 1400 mAh capacity supports extended shooting sessions
- 18 Wh energy rating meets original specifications
- Compatible with Kodak EasyShare and Sanyo Xacti models
- Compact 53.00 x 35.30 x 11.30 mm design fits original battery slots
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-KLIC5001 |
| Type | Battery |
Questions about this item
Does the 3.7 V 1400 mAh Li-ion cell run hot or drain quickly during all-day shooting?
The 5.18 Wh capacity is designed for typical camera duty cycles; Li-ion chemistry keeps self-discharge low and heat minimal during normal use.
Which camera models must I already own for this battery to fit and power on?
It replaces the KLIC-5001, DB-L50 and NVP-D7 packs in listed KODAK EasyShare and Sanyo Xacti models such as the DX6490, Z730, VPC-TH1 and HD1010.
Will the 53.00 x 35.30 x 11.30 mm pack work alongside the original charger I kept from my older camera?
Yes, the cell matches the OEM voltage and form factor, so the original charger for the KLIC-5001 or DB-L50 will charge it normally.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



