Cameron & Co
Cameron & Co DS-CS-IMC819MD 4.8V 2000mAh Ni-MH Green
Ni-MH replacement battery delivers 4.8 V 2000 mAh for I-Stat MCP9819-065 and ABBOTT analysers
- TypeHome Electronics Battery
- Powers I-Stat devices with 4.8V 2000mAh Ni-MH capacity
- Fits I-Stat MCP9819-065 and ABBOTT B11464 part numbers
- Compact 99.80 x 29.10 x 15.14 mm form factor
- Green Ni-MH chemistry delivers 9.60 Wh energy
- Brand new 100% OEM compatible replacement battery
Battery for I-Stat analysers
This Cameron & Co DS-CS-IMC819MD pack replaces the original power source in Abbott I-Stat handheld analysers. It uses nickel-metal-hydride chemistry and delivers 4.8 volts at 2000 milliampere-hours. The green casing identifies the correct replacement at a glance. It is supplied new and ready for immediate installation.
4.8 V 2000 mAh Ni-MH specification
The single figure that decides fitment is the 4.8 V 2000 mAh rating matched to the original MCP9819-065 cell. Voltage and capacity must match exactly or the analyser will not power up or will report a capacity error. No other chemistry or voltage variant is compatible with this device.
Fits analyser battery compartment
The pack slides into the dedicated battery bay of the I-Stat unit without adapters or soldering. Its 99.80 x 29.10 x 15.14 mm footprint matches the original housing so the analyser retains its balance and drop rating. It frees the operator from tethered power during point-of-care testing.
Highlights
- Powers I-Stat devices with 4.8V 2000mAh Ni-MH capacity
- Fits I-Stat MCP9819-065 and ABBOTT B11464 part numbers
- Compact 99.80 x 29.10 x 15.14 mm form factor
- Green Ni-MH chemistry delivers 9.60 Wh energy
- Brand new 100% OEM compatible replacement battery
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-IMC819MD |
| Type | Home Electronics Battery |
Questions about this item
How long will the 2000mAh capacity actually run my I-Stat device?
The 2000mAh rating at 4.8V provides 9.60Wh of energy. Actual run time depends on the current draw of your specific I-Stat model during use.
Does the Ni-MH chemistry require any special charging procedure?
As a Ni-MH pack, it should be charged with a compatible Ni-MH charger. It does not suffer from memory effect, so partial charges are acceptable.
Will the 99.80 x 29.10 x 15.14 mm dimensions fit the battery compartment?
The pack measures 99.80 mm long, 29.10 mm wide and 15.14 mm thick. Verify these dimensions against your device's battery cavity before ordering.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



