Cameron & Co
Cameron & Co DS-CS-HSA640BT 7.2 V 800 mAh Ni-MH surveillance accessory
Replacement Ni-MH battery delivers 7.2 V 800 mAh for Yale Easy AI, Easy EF, Easy Fit, HSA6400 and HSA6410 alarm panels
- TypeBattery
- Compatible with Yale Easy AI, EF, Fit and HSA6400/HSA6410 panels
- Ni-MH chemistry delivers 7.2 V 800 mAh capacity
- 76 Wh energy rating supports extended backup time
- Compact 62.00 x 45.50 x 10.60 mm form factor fits panel bay
- Replaces OEM part numbers 60AAAH6BMJ and 802306063H
Yale-compatible Ni-MH battery
The Cameron & Co DS-CS-HSA640BT is a 7.2 V 800 mAh nickel-metal-hydride pack built for Yale Easy AI, Easy EF, Easy Fit, HSA6400 and HSA6410 alarm panels. It replaces part numbers 60AAAH6BMJ and 802306063H and arrives in new condition with 100 % OEM compatibility. The green housing matches the original aesthetic and fits the panel’s battery compartment without modification.
800 mAh capacity for standby duty
At 5.76 Wh the cell delivers enough reserve energy for typical alarm-panel standby and short backup periods. It will sustain the panel through brief mains interruptions but is not sized for extended off-grid operation or high-drain accessories. Users needing multi-hour runtime or support for additional sensors should look for a higher-capacity alternative.
Direct drop-in for listed Yale panels
The pack measures 62.00 x 45.50 x 10.60 mm and uses the original connector layout, so installation requires only opening the panel and swapping the old cell. No wiring changes, firmware updates or external chargers are needed. It frees the installer from sourcing proprietary Yale spares while keeping the security system certified to its original specification.
Highlights
- Compatible with Yale Easy AI, EF, Fit and HSA6400/HSA6410 panels
- Ni-MH chemistry delivers 7.2 V 800 mAh capacity
- 76 Wh energy rating supports extended backup time
- Compact 62.00 x 45.50 x 10.60 mm form factor fits panel bay
- Replaces OEM part numbers 60AAAH6BMJ and 802306063H
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-HSA640BT |
| Type | Battery |
Questions about this item
Will this 7.2 V 800 mAh Ni-MH battery power my existing Yale HSA6400 panel without modification?
It is built as a direct replacement for the 60AAAH6BMJ and 802306063H cells used in the HSA6400 and HSA6410 panels, so it fits the original compartment and connector.
How can I confirm the DS-CS-HSA640BT is delivering the rated 5.76 Wh after installation?
The panel should show normal battery status and hold charge through its usual self-test cycle; a multimeter across the terminals will read about 7.2 V when fully charged.
Does the package include only the green 62.00 x 45.50 x 10.60 mm battery or any extra hardware?
The box contains the single Ni-MH cell; mounting screws, wiring harnesses or panel firmware are not supplied.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
vtech VC7002 open/closed sensor surveillance security system
- Home Improvement



