Cameron & Co
Cameron & Co DS-CS-HPS210NB laptop battery 7.4V 2830mAh 20.94Wh Li-Polymer Black
Replacement lithium-polymer battery for HP Pavilion 11 and Slatebook x2 models, 7.4 V, 2830 mAh, 20.94 Wh
- TypeBattery
- Fits many HP Pavilion 11 and Slatebook x2 models
- Li-Polymer chemistry stores 20.94 Wh at 7.4 V
- Slim 3.10 mm profile slips into tight chassis
- Black finish matches original HP battery colour
- Brand-new Cameron Sino cell delivers 2.83 Ah capacity
Replacement battery for HP Pavilion 11 Slatebook x2
This lithium-polymer pack is built for HP Pavilion 11 and Slatebook x2 models including the 11-h000, 11-h100 and X2 11-H010NR series. It matches the original MY02XL and HSTNN-IB5C part numbers for direct installation. Owners of these convertible notebooks can restore factory runtime without modification.
Thermals noise and power draw
Li-Polymer chemistry runs cool during typical charge and discharge cycles and produces no audible noise. The cell delivers 7.4 V at 2830 mAh for 20.94 Wh of usable energy. Normal use stays within the thermal envelope of the original design, so the tablet section remains comfortable in handheld mode.
Upgrade from a depleted or swollen original pack
When the stock battery no longer holds a full day of charge or shows physical swelling, this unit restores the original capacity. The jump is worth it if runtime has fallen below useful levels or the chassis has begun to separate. Users needing higher capacity than 20.94 Wh or a different voltage must choose another model.
Highlights
- Fits many HP Pavilion 11 and Slatebook x2 models
- Li-Polymer chemistry stores 20.94 Wh at 7.4 V
- Slim 3.10 mm profile slips into tight chassis
- Black finish matches original HP battery colour
- Brand-new Cameron Sino cell delivers 2.83 Ah capacity
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-HPS210NB |
| Type | Battery |
Questions about this item
How do I install the DS-CS-HPS210NB battery in my HP Pavilion 11 Slatebook x2 and which step is often missed?
Power off the laptop, remove the bottom screws, disconnect the old battery connector, fit the new 212.28 x 122.20 x 3.10 mm pack, reconnect the cable securely, then replace screws; the step often missed is fully seating the connector before closing the case.
What maintenance or replacement will the DS-CS-HPS210NB Li-Polymer 7.4V 2830mAh battery need later?
No routine maintenance is required; the pack should be replaced when its 20.94 Wh capacity no longer holds sufficient charge for your workload, typically after several hundred full cycles.
What limit appears first on the DS-CS-HPS210NB during sustained use?
The 20.94 Wh capacity is the first limit; under continuous load the battery will deplete to its cut-off voltage and require recharging before further operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



