We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular lithium-ion battery pack, 82 by 72 by 25 mm, 6800 mAh 7.4 V

Cameron & Co

Cameron & Co DS-CS-HPR400XL 6800mAh 7.4V battery

SKU CH-SZ55-ENJTM

A 7.4 V, 6800 mAh lithium-ion battery for Honeywell RP4 and Intermec RP4 printers

  • 6800 mAh capacity powers Honeywell RP4 printers longer
  • 4 V 50.32 Wh Li-ion cell matches original 550053-000 specification
  • 30 x 72.30 x 25.30 mm form factor fits RP4 battery compartment exactly
  • 100 % OEM compatible replacement installs without modification
  • Black Cameron Sino DS-CS-HPR400XL unit ships new and ready to use

Compatible Battery for Honeywell RP4 Printers

This 7.4 V lithium-ion pack replaces the original 550053-000 cell used in Honeywell RP4, Intermec RP4 and Oneil RP4 mobile printers. It delivers 6800 mAh capacity and 50.32 Wh energy in a black housing measuring 82.30 x 72.30 x 25.30 mm. The unit is brand new and built to 100 % OEM compatibility.

Suitable for Field Workers Needing a Direct

Workers who operate the listed RP4 models and want a like-for-like power source will find this battery matches the original voltage, chemistry and form factor. It is not intended for printers outside the RP4 series, for devices that require a different voltage, or for users who need a higher-capacity pack than 6.8 Ah.

Deciding Specification: 7.4 V 6800 mAh Li-ion

The single figure that determines fit is the 7.4 V 6800 mAh lithium-ion rating, which must match the printer's original specification exactly. If the host device calls for a different voltage or capacity this pack will not work, so verify the part number 550053-000 before purchase.

Highlights

  • 6800 mAh capacity powers Honeywell RP4 printers longer
  • 4 V 50.32 Wh Li-ion cell matches original 550053-000 specification
  • 30 x 72.30 x 25.30 mm form factor fits RP4 battery compartment exactly
  • 100 % OEM compatible replacement installs without modification
  • Black Cameron Sino DS-CS-HPR400XL unit ships new and ready to use

Specifications

BrandCameron Sino
ModelDS-CS-HPR400XL

Questions about this item

Which Honeywell or Intermec printer models does the DS-CS-HPR400XL battery fit?

It fits the Honeywell RP4, Intermec RP4 and Oneil RP4 printers that originally use part number 550053-000.

Will the 7.4 V 6800 mAh pack charge correctly with the printer's existing charging circuit?

Yes, the 7.4 V 6.8 Ah Li-ion cell is built to the same voltage and capacity spec as the original 550053-000 battery, so the printer's stock charger will charge it normally.

How can I confirm the battery is delivering its rated 50.32 Wh after installation?

Run a full print cycle on battery power and verify the printer reports the expected runtime; a healthy pack will sustain the RP4 through its normal duty cycle without early low-battery warnings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.