Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00998618BTC
In stock
Cameron & Co
Cameron & Co DS-CS-FLT100SL camera battery 3.7V 185mAh 0.68Wh black
Replacement Li-Polymer battery for Flir One thermal cameras, 3.7V 185mAh 0.68Wh
- TypeBattery
- Compatible with Flir One and One 2st thermal cameras
- 7 V 185 mAh lithium-polymer cell delivers 0.68 Wh
- Slim 54.00 × 20.54 × 3.60 mm profile fits the original bay
- Replaces OEM part SDL352054 with 100 % compatibility
- Brand-new Cameron Sino unit supplied in black finish
Purpose-built power for Flir One thermal cameras
This Cameron & Co DS-CS-FLT100SL lithium-polymer battery is made for the Flir One and One 2st thermal imaging attachments. It replaces the original SDL352054 pack and restores the runtime needed for inspection, maintenance or creative thermal photography. The cell is brand new and 100% OEM compatible.
Low self-discharge chemistry runs cool and light
Li-polymer construction keeps internal resistance low so the pack stays cool during the short, high-current bursts typical of thermal imaging. At 3.7 V and 0.185 Ah it delivers 0.68 Wh without audible noise or noticeable voltage sag. The slim 3.60 mm profile adds virtually no bulk to the camera housing.
Snap-in fit matches the original sled exactly
Dimensions of 54.00 x 20.54 x 3.60 mm align with the factory battery cavity, so the door closes flush and the contacts meet without shims. The black casing matches the Flir aesthetic and resists fingerprint smudges during frequent swaps. Builders needing a different voltage or higher capacity must look elsewhere.
Highlights
- Compatible with Flir One and One 2st thermal cameras
- 7 V 185 mAh lithium-polymer cell delivers 0.68 Wh
- Slim 54.00 × 20.54 × 3.60 mm profile fits the original bay
- Replaces OEM part SDL352054 with 100 % compatibility
- Brand-new Cameron Sino unit supplied in black finish
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-FLT100SL |
| Type | Battery |
Questions about this item
How do I install the DS-CS-FLT100SL battery in my Flir One, and what step do people often miss?
Slide the 54.00 x 20.54 x 3.60 mm pack into the compartment until the connector seats fully; the step users miss is pressing firmly until the latch clicks, not just resting it in place.
What maintenance or replacement will this 3.7 V 185 mAh Li-Polymer cell need later?
Store at roughly half charge if unused for weeks; replace the pack when run-time falls to about half of the original 0.68 Wh capacity.
What limit appears first during sustained thermal-imaging use with this battery?
The 0.185 Ah capacity is the first limit; continuous recording drains the 0.68 Wh pack in a short session, so carry a spare for longer jobs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
