We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black Li-ion battery with label showing model and capacity

Cameron & Co

Cameron & Co DS-CS-EXP605MD 3.7V 1050mAh battery

SKU CH-6MZN-73RVW

Replacement Li-ion battery for Eppendorf Easypet 3, 3.7 V 1050 mAh, 56.14 × 29.45 × 11.00 mm

  • TypeHome Electronics Battery
  • Replaces the original Eppendorf Easypet 3 power pack with a direct-fit 3.7 V 1050 mAh cell
  • Delivers 3.89 Wh of lithium-ion energy for extended pipetting sessions between charges
  • Matches OEM part numbers 4430 605.009 and CS-EXP605MD for guaranteed compatibility
  • Compact 56.14 x 29.45 x 11.00 mm black housing slips into the existing battery bay
  • Ready to use — brand-new condition with 100 % OEM-compatible performance out of the box

Cameron Sino DS-CS-EXP605MD 3.7V 1050mAh Li-ion

This Cameron Sino replacement battery delivers 3.7V and 1050mAh capacity for the Eppendorf Easypet 3 pipette controller. It matches the original 4430 605.009 part specification with a 3.89Wh energy rating. The lithium-ion cell is built for laboratory professionals who need reliable power for daily liquid handling tasks.

Check Easypet 3 model

Verify that your instrument is the Eppendorf Easypet 3 and that the existing battery carries the part number 4430 605.009. The physical dimensions are 56.14 x 29.45 x 11.00 mm, so confirm the compartment matches this footprint. No other Eppendorf models are referenced in the compatibility data.

Steady output during extended pipetting sessions

The 1.05Ah lithium-ion chemistry maintains consistent voltage across long aspiration and dispense cycles without the voltage sag seen in short bursts. Heat generation stays low during repeated use, supporting uninterrupted workflow in cell culture or assay preparation. The black casing resists common laboratory solvents and cleaning agents.

Highlights

  • Replaces the original Eppendorf Easypet 3 power pack with a direct-fit 3.7 V 1050 mAh cell
  • Delivers 3.89 Wh of lithium-ion energy for extended pipetting sessions between charges
  • Matches OEM part numbers 4430 605.009 and CS-EXP605MD for guaranteed compatibility
  • Compact 56.14 x 29.45 x 11.00 mm black housing slips into the existing battery bay
  • Ready to use — brand-new condition with 100 % OEM-compatible performance out of the box

Specifications

BrandCameron Sino
ModelDS-CS-EXP605MD
TypeHome Electronics Battery

Questions about this item

What comes in the box and do I need any extra parts to fit it in my Eppendorf Easypet 3?

The box contains one Cameron Sino DS-CS-EXP605MD lithium-ion battery. It is a direct replacement for part number 4430 605.009 so no additional components are required.

Which capacity version should I choose for the Easypet 3?

This model is supplied in a single 3.7 V 1050 mAh (3.89 Wh) configuration that matches the original specification.

What does the 3.89 Wh rating mean for daily use in the Easypet 3?

The 3.89 Wh capacity provides the same runtime as the original battery, supporting typical pipetting sessions before a recharge is needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.