We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black lithium-ion battery pack with connector pins

Cameron & Co

Cameron & Co DS-CS-EX014SL 7.4V 1.8Ah Li-ion battery

SKU CH-CCRX-87TXT

A 7.4 V 1.8 Ah lithium-ion replacement battery for ONeil Extech, Printek and Sanei handheld printers and scanners

  • Reliable power for field printers with 7.4V 1.8Ah capacity
  • Lithium-ion chemistry gives stable voltage through the discharge cycle
  • Fits ONeil Extech Apex and Andes series plus Printek FieldPro models
  • Replaces OEM part numbers 91304, 91852, 7A100014 and 100014
  • Compact 71.70 x 37.60 x 20.40 mm design slips into existing battery bays

Cameron Sino DS-CS-EX014SL 7.4V 1.8Ah Li-ion battery

This 7.4V 1.8Ah lithium-ion battery replaces the Extech 7A100014 and Printek 91304 cells used in field printers. It fits ONeil Extech Andes 3, Apex 2, Apex 3, Apex 4 and Printek FieldPro MT2 units among other listed models. The pack measures 71.70 x 37.60 x 20.40 mm and comes in black.

13.32 Wh capacity and thermal behaviour

Rated at 13.32 Wh, the cell delivers steady voltage for mobile printing without generating noticeable heat during typical receipt or label runs. Internal resistance stays low enough that the pack remains cool to the touch in normal ambient conditions. No active cooling is required and acoustic output is silent.

Sustained output over a full shift

Under continuous printing the lithium-ion chemistry maintains consistent current until the charge is depleted, avoiding the voltage sag seen in older chemistries. The 1800 mAh rating supports extended field use between charges. Recharging restores full capacity without memory effect.

Highlights

  • Reliable power for field printers with 7.4V 1.8Ah capacity
  • Lithium-ion chemistry gives stable voltage through the discharge cycle
  • Fits ONeil Extech Apex and Andes series plus Printek FieldPro models
  • Replaces OEM part numbers 91304, 91852, 7A100014 and 100014
  • Compact 71.70 x 37.60 x 20.40 mm design slips into existing battery bays

Specifications

BrandCameron Sino
ModelDS-CS-EX014SL

Questions about this item

How do I install the DS-CS-EX014SL battery in my Extech S1500 printer, and what step is often missed?

Slide the pack into the battery compartment until the latch clicks; the step users miss is seating the connector fully so the 7.4 V rail engages.

What maintenance or replacement will this 1.8 Ah Li-ion pack need over time?

Expect capacity fade after roughly 300 to 500 full cycles; replace the pack when run-time drops below usable levels for your field work.

What limit appears first during sustained printing with this 13.32 Wh battery?

The 1.8 Ah capacity depletes first, cutting power before thermal limits are reached on the Extech Apex or Printek FieldPro series.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.