We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey rectangular lithium-ion battery pack with smooth finish

Cameron & Co

Cameron & Co DS-CS-EDM500MD 14.8V 5200mAh Li-ion Battery Grey

SKU CH-04RJ-ABQ9K

Replacement lithium-ion battery for Drager and EDAN patient monitors, 14.8 V 5200 mAh capacity

  • TypeHome Electronics Battery
  • Powers Drager and EDAN monitors with 14.8V 5200mAh Li-ion cells
  • Delivers 76.96Wh for extended clinical runtime
  • Fits IM50, IM60, IM70, IM8, M50, M80 and Vista series
  • Replaces OEM part numbers 2606229, TWSLB-002, TWSLB-003 and 01.21.064143
  • Compact 160.90 x 73.6 x 22.80 mm design installs easily

Replacement battery for Drager and EDAN monitors

This lithium-ion pack replaces the original power source in Drager IM8B, M8B, Vista 120, Vista 129, Vista F2 and Vista V8 patient monitors. It also fits EDAN IM50, IM60, IM70, IM8, IM80, IM8F, M50 and M80 devices. The cell chemistry is Li-ion with a nominal voltage of 14.8V and a rated capacity of 5200mAh.

Fits directly into the monitor battery compartment

No additional cabling or adapter is required; the pack matches the mechanical footprint of 160.90 x 73.6 x 22.80 mm used by the listed equipment. It frees the monitor from mains dependency during transport or bedside use. The unit is not suitable for devices that require a different voltage, connector pinout or physical envelope.

Runs cool with no moving parts

The sealed Li-ion construction produces no fan noise and generates minimal heat during normal discharge. Power draw follows the monitor's own load profile, peaking only when the display and acquisition modules are active. The 76.96Wh energy rating supports extended mobile operation between charges.

Highlights

  • Powers Drager and EDAN monitors with 14.8V 5200mAh Li-ion cells
  • Delivers 76.96Wh for extended clinical runtime
  • Fits IM50, IM60, IM70, IM8, M50, M80 and Vista series
  • Replaces OEM part numbers 2606229, TWSLB-002, TWSLB-003 and 01.21.064143
  • Compact 160.90 x 73.6 x 22.80 mm design installs easily

Specifications

BrandCameron Sino
ModelDS-CS-EDM500MD
TypeHome Electronics Battery

Questions about this item

How long will the 5200mAh capacity last before the 14.8V output drops under continuous monitoring use?

The 76.96Wh lithium-ion pack delivers 5.2Ah at 14.8V; runtime depends on the monitor's power draw, so consult the device's consumption rating to estimate operating hours.

Does the battery generate noticeable heat or fan noise during all-day operation in a Drager Vista 120?

As a passive Li-ion cell pack with no moving parts, it produces no fan noise; normal warmth occurs during discharge, but excessive heat suggests a device or cell issue.

Which specific monitor models must I already own for this DS-CS-EDM500MD to be compatible?

It replaces part numbers 2606229, TWSLB-002 and TWSLB-003 in Drager IM8B, M8B, Vista 120, Vista 129, Vista F2, Vista V8 and EDAN IM50, IM60, IM70, IM8, IM80, IM8F, M50, M80 monitors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.