Cameron & Co
Cameron & Co DS-CS-EDM200MD 11.1v 2600mAh 28.86Wh video accessory
Replacement lithium-ion battery for EDAN IM12 and IM20 medical monitors, 11.1 V 2600 mAh 28.86 Wh
- TypeHome Electronics Battery
- Powers EDAN IM12 and IM20 monitors
- 1 V 2600 mAh 28.86 Wh lithium-ion cell
- 100 % OEM-compatible replacement for TWSLB-012
- Compact 94.60 x 62.35 x 28.92 mm black pack
- Ready-to-use 2.6 Ah capacity for medical carts
Compatible battery for EDAN IM12 and IM20
This replacement battery fits the EDAN IM12 and IM20 monitors and replaces part number TWSLB-012. It delivers 11.1V and 2600mAh for 28.86Wh of capacity. The lithium-ion cell is supplied new and ready for use in medical environments.
Suits technicians servicing IM12 or IM20 units
It is not for the EDAN IM3 monitor, so buyers with that model need a different part. The pack matches the original dimensions of 94.60 x 62.35 x 28.92 mm and the black finish. Installers should verify the device model before fitting.
Steady output during long monitoring sessions
The 2.6Ah lithium-ion chemistry maintains voltage across extended shifts without the sharp drop seen in short bursts. The 100% OEM-compatible design supports repeated charge cycles in clinical settings. Heat stays controlled within the sealed housing during continuous operation.
Highlights
- Powers EDAN IM12 and IM20 monitors
- 1 V 2600 mAh 28.86 Wh lithium-ion cell
- 100 % OEM-compatible replacement for TWSLB-012
- Compact 94.60 x 62.35 x 28.92 mm black pack
- Ready-to-use 2.6 Ah capacity for medical carts
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-EDM200MD |
| Type | Home Electronics Battery |
Questions about this item
Which EDAN monitors does the DS-CS-EDM200MD battery fit?
The DS-CS-EDM200MD is compatible with the EDAN IM12 and IM20 monitors and replaces the TWSLB-012 part number. It is not for the IM3 model.
Will the 94.60 x 62.35 x 28.92 mm pack sit in the same bay as my original EDAN battery?
Yes, the pack matches the OEM dimensions of 94.60 x 62.35 x 28.92 mm so it seats in the existing battery bay of the IM12 or IM20 without modification.
How can I confirm the 11.1 V 2600 mAh pack is delivering full capacity after the first charge?
Run the monitor on battery alone until shutdown; a healthy pack should run close to the rated 28.86 Wh, which the IM12/IM20 fuel gauge will report as near 100 % before the low-battery warning.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



