Cameron & Co
Cameron & Co DS-CS-ECG108MD Battery 12.0V 1.2Ah Blue
Replacement Ni-MH battery for Kenz Cardico ECG-108 and ECG-110, 12.0 V 1.2 Ah in blue
- TypeHome Electronics Battery
- Powers Kenz Cardico ECG-108 and ECG-110 models
- 0 V 1.2 Ah Ni-MH chemistry delivers 14.40 Wh
- Compact 70.90 x 43.10 x 28.60 mm fits device bay
- Blue housing matches original equipment colour
- Brand new 100 % OEM compatible replacement
Cameron Sino DS-CS-ECG108MD Battery
This 12.0 V nickel-metal hydride pack replaces the original power source for Kenz Cardico ECG-108 and ECG-110 recorders. It delivers 1.2 Ah capacity in a blue housing that matches the factory colour scheme. The cell is built to the HHR-12F25G1 specification and ships ready for immediate installation.
Form factor and connections
Measuring 70.90 x 43.10 x 28.60 mm, the unit slides into the existing battery compartment without adapters or cable modifications. Its two-pin connector aligns with the device’s native socket, freeing the operator from external power bricks during mobile recording sessions. No additional chargers or mounting hardware are required beyond what the recorder already provides.
Sustained operation
The Ni-MH chemistry maintains a steady 12.0 V output across the 14.40 Wh rating, supporting long monitoring periods without the voltage sag seen in short bursts. Self-discharge remains low during storage, so the pack holds usable charge between infrequent deployments. It is not suited for applications that demand higher current peaks or larger energy reserves than 1200 mAh provides.
Highlights
- Powers Kenz Cardico ECG-108 and ECG-110 models
- 0 V 1.2 Ah Ni-MH chemistry delivers 14.40 Wh
- Compact 70.90 x 43.10 x 28.60 mm fits device bay
- Blue housing matches original equipment colour
- Brand new 100 % OEM compatible replacement
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-ECG108MD |
| Type | Home Electronics Battery |
Questions about this item
How long will the 1.2 Ah Ni-MH pack run a Kenz Cardico ECG-108 before voltage drops?
The 12.0 V 1200 mAh cell stores 14.40 Wh, so runtime depends on the ECG-108's current draw; divide 1.2 Ah by that draw to estimate hours.
Does the battery get hot or make noise during continuous ECG-108 monitoring?
Ni-MH chemistry runs silently; warmth is normal under load but the pack has no fan or moving parts.
Which connectors or chargers must I already own to use this blue 12.0 V pack?
It replaces the HHR-12F25G1 inside the ECG-108 or ECG-110; you need the device's original charging cradle or AC adapter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



