Cameron & Co
Cameron & Co DS-CS-DRL250SL 9.0V 2.7Ah Alkaline Battery White
9.0 V 2.7 Ah alkaline battery powers NABC HTL10 and compatible keyless door locks
- TypeHome Electronics Battery
- Powers keyless door locks with 9.0 V alkaline chemistry
- Delivers 2.7 Ah capacity for extended lock operation
- Fits NABC HTL10, DL-25 and compatible Vingcard Timelox models
- Measures 103.05 x 58.10 x 15.76 mm for direct replacement
- Non-rechargeable 24.30 Wh pack ensures reliable single-use performance
Purpose-Built Battery for Hotel Door Locks
The Cameron & Co DS-CS-DRL250SL is a 9.0V 2.7Ah alkaline cell engineered for NABC HTL10 and compatible keyless entry systems. It supplies 24.30Wh to power digital door locks, IC card hotel locks and magnetic card readers in hospitality and secure-access environments.
Replaces Disposable Packs in High-Traffic
This single white unit substitutes the six-AA alkaline packs used in Vingcard Timelox HTL10, Ultralast DL-25 and Kiesub KIE101-6AP-1 housings. The jump is worth it when maintenance crews need to reduce change-out frequency across corridors, motels or casino floors.
Fits Existing Lock Cavities Without Rewiring
Measuring 103.05 x 58.10 x 15.76 mm, the battery slides into the original compartment of supported models including IB digital cabinet locks and apartment door locks. No adapter or voltage conversion is required; the alkaline chemistry simply frees staff from carrying loose AA cells.
Highlights
- Powers keyless door locks with 9.0 V alkaline chemistry
- Delivers 2.7 Ah capacity for extended lock operation
- Fits NABC HTL10, DL-25 and compatible Vingcard Timelox models
- Measures 103.05 x 58.10 x 15.76 mm for direct replacement
- Non-rechargeable 24.30 Wh pack ensures reliable single-use performance
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-DRL250SL |
| Type | Home Electronics Battery |
Questions about this item
What are the exact dimensions of the 103.05 x 58.10 x 15.76 mm battery so I can confirm it fits my NABC HTL10 lock?
The pack measures 103.05 mm long, 58.10 mm wide and 15.76 mm thick, matching the original DS-CS-DRL250SL form factor for the HTL10 and compatible DL-25 or KIE101-6AP-1 models.
How do I install the 9.0V alkaline pack in a keyless door lock, and what is the common mistake?
Open the lock’s battery compartment, remove the old pack, insert the new white 2700 mAh unit observing the marked polarity, then close the cover; the step often missed is ensuring the connector seats fully before snapping the cover shut.
When should I replace the 2.7 Ah alkaline battery in a hotel IC card lock?
Replace the non-rechargeable 24.30 Wh pack when the lock indicates low voltage, responds slowly or fails to actuate; typical service life depends on traffic but the 9.0V output will drop steadily until the lock signals exhaustion.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



