Cameron & Co
Cameron & Co DS-CS-CRX100MD 2.1Ah Li-Polymer battery
Replacement Li-Polymer battery for Carestream DRX-1 systems, 14.8 V 2.1 Ah capacity
- TypeHome Electronics Battery
- Compatible with Carestream DRX-1 systems
- 1 Ah Li-Polymer chemistry delivers 31.08 Wh capacity
- 8 V nominal voltage matches original specification
- Replaces OEM part numbers 1001163 and 441400052
- Slim 6.80 mm profile fits DRX-1 flat panel
Compatible replacement for Carestream DRX-1
This 14.8 V lithium-polymer pack replaces original part numbers 1001163, 441400052, 8G5132, SPAA1531 and SPAC1432. It fits the DRX-1, DRX-1 System Flat Panel Digita and DRX-1 System Flat Panel Digita devices. The cell delivers 2.1 Ah and 31.08 Wh of capacity. It is supplied new and fully OEM compatible.
Thermals noise and power draw
Lithium-polymer chemistry runs silently with no moving parts. Self-discharge is low, so the pack holds charge during storage. Normal use produces negligible heat, and no active cooling is required. The battery simply slots into the device and powers the detector panel.
What the bundle changes
Only the single battery unit is included in the box. No charger, cable or mounting hardware is bundled. The pack is ready to install as a direct swap for the original battery. Buyers who need a charging cradle or multi-bay charger must source those separately.
Highlights
- Compatible with Carestream DRX-1 systems
- 1 Ah Li-Polymer chemistry delivers 31.08 Wh capacity
- 8 V nominal voltage matches original specification
- Replaces OEM part numbers 1001163 and 441400052
- Slim 6.80 mm profile fits DRX-1 flat panel
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-CRX100MD |
| Type | Home Electronics Battery |
Questions about this item
How do I install the DS-CS-CRX100MD battery into the Carestream DRX-1, and which step is often missed?
Slide the pack into the DRX-1 compartment until the latch clicks; the step most people miss is verifying the 14.8 V label faces outward so the connector key aligns correctly.
What maintenance or replacement will the 2.1 Ah Li-Polymer pack need over time?
The 2100 mAh cell loses capacity with each charge cycle; replace the pack when operating time no longer covers a full clinical shift.
What limit appears first during continuous scanning with the 31.08 Wh battery?
Thermal protection triggers once the internal temperature rises above the safe threshold, pausing output until the pack cools.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



