Cameron & Co
Cameron & Co DS-CS-BPT38CL battery Ni-MH 3.6V 1200mAh black telephone accessory
Ni-MH replacement battery delivering 3.6 V and 1200 mAh for compatible cordless handsets
- TypeBattery
- 6V Ni-MH chemistry delivers reliable cordless handset power
- 1200mAh capacity supports long talk and standby times
- Replaces Sony BP-T38 and Radio Shack 23-9097 packs
- Fits SPP-A2770, SPP-A2780, SPP-H273 and S2720 models
- Compact 48.90 x 37.93 x 22.13 mm design slides into existing battery compartment
Compatible cordless phone battery
The Cameron & Co DS-CS-BPT38CL is a Ni-MH replacement battery rated at 3.6V and 1200mAh. It fits Radio Shack models 23-9097, 43-8031, 43-8032, 43-8033 and 9602083 as well as Sony SPP-A2770, SPP-A2780, SPP-H273, SPP-S2720 and SPP-S2730 handsets. Buyers needing a different voltage, chemistry or form factor should look elsewhere.
Simple drop-in installation
The pack matches the original dimensions of 48.90 x 37.93 x 22.13 mm and uses the same two-pin connector, so it slides into the handset battery compartment without tools or soldering. The only common issue is reversed polarity if the connector is forced the wrong way; aligning the keyed plug prevents this. No firmware update or calibration routine is required.
Steady talk-time delivery
Under continuous conversation load the Ni-MH chemistry maintains a stable voltage curve, avoiding the sharp drop-off seen in aged cells. The 1.2 Ah capacity supports extended talk sessions and long standby periods between charges. Self-discharge is low enough that a handset left on its base for weeks remains ready to use.
Highlights
- 6V Ni-MH chemistry delivers reliable cordless handset power
- 1200mAh capacity supports long talk and standby times
- Replaces Sony BP-T38 and Radio Shack 23-9097 packs
- Fits SPP-A2770, SPP-A2780, SPP-H273 and S2720 models
- Compact 48.90 x 37.93 x 22.13 mm design slides into existing battery compartment
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-BPT38CL |
| Type | Battery |
Questions about this item
How do I confirm the battery is charging correctly after installing it in my Sony SPP-A2770 handset?
The handset should show a charging indicator and reach full charge within the normal cycle; the pack delivers 3.6 V and 1200 mAh as specified.
What comes in the package and is any extra hardware needed for installation?
One black Ni-MH battery measuring 48.90 x 37.93 x 22.13 mm is supplied; no additional parts are required for a direct swap.
Which version should I choose if my device lists part number 960-2083 or BP-T38?
This DS-CS-BPT38CL pack replaces both 960-2083 and BP-T38, so the single listed capacity of 1.2 Ah covers those models.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



