Cameron & Co
Cameron & Co DS-CS-BAS916MD Li-SOCl2 7.2V 2.7Ah White
Non-rechargeable 7.2 V 2.7 Ah Li-SOCl2 battery powers Baxter Healthcare Colleague infusion pump memory modules
- TypeHome Electronics Battery
- Powers Baxter Colleague infusion pump memory backup
- 2 V 2.7 Ah Li-SOCl2 primary cell
- 100 % OEM compatible with part numbers 5977 B11192 OM11192
- Compact 73.00 x 29.80 x 16.30 mm white housing
- Non-rechargeable 19.44 Wh capacity for reliable operation
Compatible battery for Baxter Colleague infusion
This lithium thionyl chloride cell replaces part numbers 5977, B11192 and OM11192 in Baxter Healthcare Colleague infusion pump memory modules. It is a primary, non-rechargeable unit supplied new and fully OEM compatible.
Fits directly into the pump memory compartment
The pack measures 73.00 x 29.80 x 16.30 mm and slides into the existing battery slot without adapters or wiring changes. Because it is a single-use chemistry, it removes the need for charging circuitry and frees the device from mains dependency during operation.
Delivers steady voltage over the full discharge
Li-SOCl2 chemistry provides a nominal 7.2 V and 2.7 Ah capacity, yielding 19.44 Wh of energy for long-term memory retention. The flat discharge profile maintains reliable power until depletion, avoiding the voltage sag common with rechargeable alternatives under continuous load.
Highlights
- Powers Baxter Colleague infusion pump memory backup
- 2 V 2.7 Ah Li-SOCl2 primary cell
- 100 % OEM compatible with part numbers 5977 B11192 OM11192
- Compact 73.00 x 29.80 x 16.30 mm white housing
- Non-rechargeable 19.44 Wh capacity for reliable operation
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-BAS916MD |
| Type | Home Electronics Battery |
Questions about this item
How long will the 2.7 Ah Li-SOCl2 cell power the pump before it must be replaced?
The 7.2 V, 2.7 Ah primary cell delivers 19.44 Wh; run-time depends on the pump's current draw, so divide 2700 mAh by that draw to estimate hours.
Does the battery generate noticeable heat or noise during continuous infusion?
Li-SOCl2 chemistry runs silently and produces minimal heat under normal load; the pump's own electronics dominate any warmth you feel.
Which Baxter pump models accept the DS-CS-BAS916MD without an adapter?
It fits the Colleague Infusion Pump Memory 2M91617 and replaces Baxter part numbers 5977, B11192 and OM11192 directly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



