Cameron & Co
Cameron & Co DS-CS-AUS660SL cell phone battery 5.9 Ah
A 5.9 Ah lithium-polymer replacement battery for Asus ROG Phone 2 series, measuring 110.54 × 53.84 × 5.38 mm
- Li-Polymer chemistry gives stable 5.9 Ah output
- 85 V nominal voltage supplies 22.72 Wh energy
- 54 x 53.84 x 5.38 mm form fits handset bay
- 100 % OEM compatible with Asus ROG Phone 2 models
- Replaces original part numbers 0B200-03510300 and C11P1901
Product identity
This Cameron & Co DS-CS-AUS660SL is a new Li-Polymer cell phone battery rated at 5.9 Ah and 3.85 V. It replaces Asus part numbers 0B200-03510300 and C11P1901 in the ROG Phone 2 series including the Strix and Ultimate models. The pack measures 110.54 x 53.84 x 5.38 mm and ships in black.
Who this suits
Owners of an Asus I001D, ROG Phone 2, ROG Phone 2 Strix or ROG Phone 2 Ultimate who need a direct 100 % OEM-compatible replacement will find the correct voltage, capacity and connector here. Builders who require a different form factor, a higher capacity than 5900 mAh, or a battery for any other phone model should look elsewhere.
Deciding specification
The single figure that determines fit is the 5.9 Ah capacity at 3.85 V combined with the 110.54 x 53.84 x 5.38 mm footprint; only devices designed for this exact energy rating and physical envelope will accept the pack.
Highlights
- Li-Polymer chemistry gives stable 5.9 Ah output
- 85 V nominal voltage supplies 22.72 Wh energy
- 54 x 53.84 x 5.38 mm form fits handset bay
- 100 % OEM compatible with Asus ROG Phone 2 models
- Replaces original part numbers 0B200-03510300 and C11P1901
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-AUS660SL |
Questions about this item
Will the 110.54 mm by 53.84 mm by 5.38 mm battery fit inside the Asus ROG Phone 2 chassis?
The pack measures 110.54 mm by 53.84 mm by 5.38 mm and is built to the exact footprint of the original Asus 0B200-03510300 cell, so it sits in the same cavity without modification.
What is the correct way to connect the 3.85 V Li-Polymer pack during installation?
Power off the phone, disconnect the old cell, align the new battery's connector with the motherboard header, press evenly until it clicks, then reassemble; the step most people miss is forgetting to peel the insulating film off the contact pads before seating the connector.
When should the 5900 mAh cell be replaced?
Replace the battery when the phone no longer holds a usable charge through a typical day or when the operating system reports a significant capacity loss; the Li-Polymer chemistry is rated for hundreds of cycles before that point.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Shenzhen LVSUN Electronics Co. Ltd G20-MBAT cell phone battery 1600mAh 3.7V
LG Electronics BL-53QH 2100 mAh cell phone battery (2 pack)
- Replacement Battery
- LG



