Cameron & Co
Cameron & Co DS-CS-ASM103MD Ni-MH battery 2.4V 800mAh
Ni-MH replacement cell delivers 2.4 V and 800 mAh for Drager JM103 jaundice meters
- TypeHome Electronics Battery
- Compatible with Drager JM103 jaundice meters
- Replaces OEM part numbers 2HR-4UC and OM11401
- Ni-MH chemistry delivers 2.4V 800mAh capacity
- Compact 45.00 x 22.00 x 10.00 mm form factor
- Brand new 100% OEM compatible replacement battery
Replacement for JM103 Jaundice Meter
The Cameron & Co DS-CS-ASM103MD is a nickel-metal hydride battery built for the Drager JM103, Minolta JM103 and Air Shields-Vickers JM103 jaundice meters. It delivers 2.4 volts and 800 milliampere-hours in a grey pack measuring 45.00 by 22.00 by 10.00 millimetres. The cell replaces original part numbers 2HR-4UC, 2HR-4UC-MC-2 and OM11401.
Upgrades aging Ni-MH cells
When the original pack no longer holds a full charge or the meter shuts down during use, this 1.92 watt-hour replacement restores the specified runtime. The jump is worth it if the device shows reduced operating time between charges or fails to power on reliably with the old battery installed.
Fits the meter’s internal compartment
The pack slides into the JM103 battery bay without modification and connects to the existing terminals. It frees the instrument from mains dependency during transport or ward rounds. Buyers who need a different voltage, a higher capacity or a lithium chemistry will not be served by this model.
Highlights
- Compatible with Drager JM103 jaundice meters
- Replaces OEM part numbers 2HR-4UC and OM11401
- Ni-MH chemistry delivers 2.4V 800mAh capacity
- Compact 45.00 x 22.00 x 10.00 mm form factor
- Brand new 100% OEM compatible replacement battery
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-ASM103MD |
| Type | Home Electronics Battery |
Questions about this item
Will the 45.00 x 22.00 x 10.00 mm pack fit the battery compartment of my Drager JM103?
Yes — the pack matches the original 2HR-4UC dimensions, so it slides into the JM103, Airshields 103 and Minolta JM103 compartments without modification.
What is the correct way to insert the grey Ni-MH pack, and what step do users often miss?
Align the polarity markers on the pack with the meter’s contacts, press firmly until the latch clicks, then run a full charge cycle before first clinical use.
When should I replace the 2.4V 800mAh Ni-MH battery in the jaundice meter?
Replace it when the meter shows reduced run-time between charges or fails to hold a full charge after the recommended conditioning cycle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



