Cameron & Co
Cameron & Co DS-CS-ALN933SL Li-ion battery 5.2 Ah black
Lithium-ion replacement battery rated 10.8 V and 5.2 Ah for Agilent handheld cable and antenna testers
- TypeHome Electronics Battery
- Powers Agilent N9330 series analysers with 10.8 V 5.2 Ah Li-ion cells
- Delivers 56.16 Wh capacity for extended field measurements
- Replaces OEM part numbers 72R6893 N9330B-BAT NF2040AG24
- Compact 150.40 x 59.20 x 22.20 mm form fits handheld chassis
- Brand-new Cameron Sino battery ensures 100 % OEM compatibility
Replacement Battery for Agilent Testers
The Cameron & Co DS-CS-ALN933SL is a lithium-ion replacement battery rated at 5.2 Ah and 10.8 V. It is built to power compatible Agilent handheld cable and antenna analysers in field and bench environments.
For Agilent N9330 and N9912 Owners
Technicians who own a supported Agilent handheld analyser such as the N9330, N9330A, N9330B, N9334, N9340B, N9912a, N9913A, N9914A, N9915A, N9916A, N9917A, N9918A, N9923A, N9925A, N9926A, N9927A, N9928A, N9935A, N9936A, N9937A or N9938A can use this pack. It is not suited for test equipment outside the listed models or for devices that require a different voltage or connector layout.
5.2 Ah Capacity at 10.8 Volts
The cell assembly delivers 5200 mAh for 56.16 Wh of energy storage. This capacity figure determines whether the runtime meets the demands of a specific measurement session.
Highlights
- Powers Agilent N9330 series analysers with 10.8 V 5.2 Ah Li-ion cells
- Delivers 56.16 Wh capacity for extended field measurements
- Replaces OEM part numbers 72R6893 N9330B-BAT NF2040AG24
- Compact 150.40 x 59.20 x 22.20 mm form fits handheld chassis
- Brand-new Cameron Sino battery ensures 100 % OEM compatibility
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-ALN933SL |
| Type | Home Electronics Battery |
Questions about this item
What voltage does the 10.8 V 5200 mAh lithium-ion pack deliver to an Agilent N9330 analyser?
The pack supplies a nominal 10.8 V and 56.16 Wh, matching the original 72R6893 specification for the N9330 series.
Will the 150.40 × 59.20 × 22.20 mm black case fit the battery compartment of an N9334 field tester?
Yes — those dimensions correspond to the NF2040AG24 form factor used in the N9334, N9912a through N9938A and related models.
How do I install the DS-CS-ALN933SL without triggering a capacity error on the handheld unit?
Power off the tester, slide the pack into the rear bay until the latch clicks, then run a full charge cycle before first use so the fuel gauge calibrates to 5.2 Ah.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



