We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack, dark casing, labelled for Hamilton C1 MRI1 T1

Cameron & Co

Cameron & Co Battery for Hamilton C1 MRI1 T1 6600mAh 73.26Wh

SKU CH-1GKK-Q2A91

Lithium-ion replacement battery for Hamilton C1, MRI1 and T1 ventilators, 6600 mAh / 73.26 Wh, 11.1 V, 153.80 × 62.00 × 22.50 mm, 331.0 g

  • Specifications153.80 x 62.00 x 22.50
  • Typelithium_ion
  • Battery Pack153.80 x 62.00 x 22.50
  • Battery Typelithium_ion
  • Battery Capacity6600 milliamp_hours
  • Compatible with Hamilton C1 MRI1 T1 medical devices
  • 6600 mAh capacity delivers 73.26 Wh of runtime
  • Certified to ISO 9001 RoHS CE safety standards
  • Built-in protection against overcharge over-discharge short circuit
  • 80 x 62.00 x 22.50 mm form factor fits original slot

Compatible Medical Battery

This lithium-ion replacement battery fits Hamilton C1, MRI1 and T1 devices. It matches the original specifications and uses a fully decoded chip for direct compatibility. The unit is certified to ISO9001, RoHS and CE standards. It is intended for medical equipment operators needing a reliable power source.

Capacity and Runtime

The pack delivers 6600mAh at 11.1V, providing 73.26Wh of energy. This capacity supports extended operation between charges for the listed ventilator models. Runtime will vary with device settings and patient ventilation demands. The battery reaches optimal performance after two or three full charge cycles.

Physical and Safety Limits

Dimensions are 153.80 x 62.00 x 22.50mm with a weight of 331.0g. The pack includes overcharge, over-discharge, over-voltage and short-circuit protection circuits. Do not disassemble, expose to fire or water, or store above 60°C. A quality charger is required to maintain cell health and safety.

Highlights

  • Compatible with Hamilton C1 MRI1 T1 medical devices
  • 6600 mAh capacity delivers 73.26 Wh of runtime
  • Certified to ISO 9001 RoHS CE safety standards
  • Built-in protection against overcharge over-discharge short circuit
  • 80 x 62.00 x 22.50 mm form factor fits original slot

Specifications

BrandCameron Sino
ModelBattery For HAMILTON
Part Number4894128149514
Specifications153.80 x 62.00 x 22.50
Typelithium_ion
Battery Pack153.80 x 62.00 x 22.50
Battery Typelithium_ion
Battery Capacity6600 milliamp_hours

Questions about this item

Will this 6600mAh lithium-ion pack fit the Hamilton C1, MRI1 and T1 ventilators I already use?

Yes — it is built to the same 153.80 x 62.00 x 22.50 mm dimensions and 11.1 V specification as the original Hamilton 110731-O and 369108 packs, so it slots straight into those models.

How can I confirm the battery is operating correctly once installed?

The fully decoded chip communicates with the ventilator’s fuel-gauge; after two or three full charge-discharge cycles the on-screen capacity reading should match 73.26 Wh and the device should run its normal self-test without error codes.

What comes in the box and is anything else required?

The package contains one 331.0 g rechargeable battery wrapped in shock-absorbing foam; no charger, cables or mounting hardware are included, so you reuse the existing Hamilton charging system.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.