AGM Global Vision Fuzion TM25-384 Fusion Thermal Monocular
- Monoculars
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Cameron & Co
Replacement lithium-ion battery for Fluke DTX-1200 and DTX-1800 cable analysers, 5200mAh at 7.4V
This lithium-ion pack replaces the Fluke BP7440 cell used in DTX-1200-M, DTX-1200-MS, DTX-1800-M and DTX-1800-MS cable certification analysers. It delivers 5200 mAh at 7.4 volts for extended field testing sessions. The new fully decoded chip communicates with the host instrument exactly like the original battery. Field engineers and network installers gain a direct drop-in power source for legacy Fluke hardware.
The cell measures 49.50 by 38.30 by 10.65 millimetres and weighs 265.4 grams, matching the OEM footprint for the battery compartment. Built-in safeguards guard against overcharge, over-discharge, over-voltage and short-circuit conditions during daily use. A shock-absorbing foam insert protects the pack during transport between job sites. Installation requires only seating the connector firmly into the analyser; no soldering or tools are needed.
Rated at 38.48 watt-hours, the pack supports long cable certification runs but will eventually require recharging during multi-day projects. Performance peaks after two or three full charge and discharge cycles when the cell is first commissioned. Storage above 60 or 140 is prohibited to avoid permanent capacity loss. The battery is not suitable for devices outside the listed DTX series or for applications demanding higher voltage or alternative chemistries.
| Brand | Cameron Sino |
|---|---|
| Model | Battery For Fluke |
| Part Number | 4894128168836 |
| Specifications | 49.50 x 38.30 x 10.65 |
| Type | lithium_ion |
| Battery Pack | 49.50 x 38.30 x 10.65 |
| Battery Type | lithium_ion |
| Battery Voltage | 7.4 volts |
The pack supplies a nominal 7.4 volts, matching the original BP7440 specification for the DTX-1200-M, DTX-1200-MS, DTX-1800-M and DTX-1800-MS analysers.
Yes, those dimensions correspond to the Fluke DTX-Lion form factor used across the DTX-1200 and DTX-1800 families, so the pack seats directly in the existing cavity.
Open the battery door, slide the pack in until the connector clicks fully home, then close the door; the step often missed is verifying the connector is squarely seated before latching the cover.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?