Cameron & Co
Cameron & Co Battery DS-CS-BDU300SL 3.7V 250mAh 0.93Wh Li-Polymer Black
A 3.7 V 250 mAh lithium-polymer replacement battery for Bosch BDU3XX Intuvia displays, measuring 31.52 × 20.10 × 4.71 mm
- Direct replacement for Bosch BDU3XX Intuvia displays
- 7 V 250 mAh lithium-polymer cell delivers 0.93 Wh
- Compact 31.52 x 20.10 x 4.71 mm form fits original housing
- 100 % OEM-compatible part number AHB502030
- Ready-to-install black battery for Performance Line CX e-bikes
Replacement battery for Bosch Intuvia display
This Cameron Sino lithium-polymer cell replaces the original AHB502030 pack used in Bosch BDU3XX Intuvia displays on Performance Line CX e-bikes. It delivers 3.7 V and 0.93 Wh in a compact black housing. The unit is brand new and built to 100 % OEM compatibility.
Capacity matches the original 0.25 Ah rating
The single figure that confirms fit is the 250 mAh capacity, which equals the factory specification for the Intuvia display. A different amp-hour value would change run-time and could prevent the display from powering up correctly.
Low self-discharge chemistry runs cool with no fan
Li-polymer construction produces negligible heat during the display's normal current draw, so the battery stays at ambient temperature and makes no audible noise. Power consumption is limited to the display's own microamp-level standby and active cycles.
Highlights
- Direct replacement for Bosch BDU3XX Intuvia displays
- 7 V 250 mAh lithium-polymer cell delivers 0.93 Wh
- Compact 31.52 x 20.10 x 4.71 mm form fits original housing
- 100 % OEM-compatible part number AHB502030
- Ready-to-install black battery for Performance Line CX e-bikes
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-BDU300SL |
Questions about this item
How long will the 3.7 V 250 mAh capacity run my Bosch Intuvia display?
The 0.93 Wh cell replaces the original AHB502030 and delivers the same runtime the factory battery provided when new.
Does the two-wire JST connector match the BDU3XX board header?
Yes — this is a 100 % OEM-compatible replacement designed for the exact connector used on Bosch Intuvia and Performance Line CX displays.
Will the 31.52 × 20.10 × 4.71 mm pack fit inside the display housing?
The dimensions match the original pack, so it slides into the BDU3XX / Intuvia battery compartment without modification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Cables To Go 39908 5 in Wall Mount Speaker 70V
- Consumer Electronics
LG Electronics SQC4R-CR 4.1 Channel Wireless Subwoofer Speaker Kit
- Kit



