We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack with dark grey plastic casing and gold contacts

Cameron & Co

Cameron & Co 900mAh 3.7V Li-ion Battery for 3M TAC300/500

SKU CH-6DKM-8MGD3

Replacement lithium-ion battery for 3M TAC300 and TAC500 wireless headsets, 900 mAh at 3.7 V

  • Typelithium_ion
  • Pack51.75 x 36.70 x 13.36
  • Chemicallithium_ion
  • Capacity900 milliamp_hours
  • CompatibilityBattery For 3M
  • FeaturesBattery
  • Compatible with 3M TAC300, TAC300-OTH and TAC500 headsets
  • 900 mAh capacity delivers 3.33 Wh of energy
  • 7 V lithium-ion chemistry matches original specification
  • Compact 51.75 x 36.70 x 13.36 mm size fits battery bay
  • Built-in protection against overcharge, over-discharge and short circuit

Replacement Battery for 3M TAC Headsets

This lithium-ion cell replaces the original power pack in 3M TAC300, TAC300-OTH and TAC500 wireless headsets. It delivers 900 mAh at 3.7 V for 3.33 Wh of capacity. A fully decoded chip ensures the headset recognises the battery exactly like the factory unit. The pack measures 51.75 x 36.70 x 13.36 mm and weighs 30.4 g.

Low Self-Discharge Chemistry

Lithium-ion construction holds charge during standby with minimal self-discharge, so the headset is ready after weeks in storage. Normal operation stays well within the 60 °C upper storage limit, and the integrated protection circuit guards against over-charge, over-discharge, over-voltage and short circuits. No active cooling is required and the cell runs silently.

Drop-In Fit for Existing Chassis

The battery slides into the headset's original compartment without modification and connects via the stock connector. Its 51.75 x 36.70 x 13.36 mm footprint matches the OEM cavity, freeing no extra space but also demanding none. Installation videos are widely available for guidance. Not suitable for headsets outside the TAC300/500 series or for devices requiring a different voltage or form factor.

Highlights

  • Compatible with 3M TAC300, TAC300-OTH and TAC500 headsets
  • 900 mAh capacity delivers 3.33 Wh of energy
  • 7 V lithium-ion chemistry matches original specification
  • Compact 51.75 x 36.70 x 13.36 mm size fits battery bay
  • Built-in protection against overcharge, over-discharge and short circuit

Specifications

BrandCameron Sino
ModelWireless Headset
Typelithium_ion
Pack51.75 x 36.70 x 13.36
Chemicallithium_ion
Capacity900 milliamp_hours
CompatibilityBattery For 3M
FeaturesBattery

Questions about this item

How do I install this battery in my 3M TAC300 headset, and what step is often missed?

Slide the battery into the compartment, then ensure the connector is fully seated; a loose plug is the step most often missed.

What maintenance will this 900mAh lithium-ion cell need over its life?

Run two or three full charge and discharge cycles when new, then avoid low-quality chargers to preserve capacity.

At what temperature does sustained use become unsafe for this 3.7V pack?

Do not store or operate the battery above 60 °C (140 °F); exceeding that limit risks permanent damage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.