We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular outdoor wireless access point with integrated sector antenna and mounted GPS sync module

Cambium Networks

Cambium Networks ePMP 2000 5GHz Access Point Lite GPS Sync FCC

SKU CH-VKDK-0X1HG

5 GHz access point supports up to 10 subscriber modules with GPS sync and intelligent filtering across 5150-5970 MHz

  • Supports up to 10 subscriber modules per access point
  • Operates across 5150-5970 MHz frequency range for flexible deployment
  • Includes 56 V PoE power supply for simplified installation
  • GPS synchronisation enables coordinated multi-access-point networks
  • 3at compliant 100/1000BaseT interface provides reliable wired connectivity

ePMP 2000 5 GHz Access Point Lite

The Cambium Networks ePMP 2000 Lite is a GPS-synchronised 5 GHz access point designed for service providers and WISP operators deploying fixed wireless broadband. It supports up to 10 subscriber modules and operates across the 5150-5970 MHz frequency range. Intelligent Filtering and Smart Beamforming mitigate interference in congested spectrum environments. The unit includes a 56 V PoE injector for simplified installation.

Upgrade from non-GPS-synchronised sectors

This access point replaces older sector radios that lack GPS synchronisation and advanced interference rejection. The jump is worthwhile when co-located sectors suffer from self-interference or when off-channel noise degrades uplink performance. Hypure technology combines dynamic receive filtering with transmit spectral cleaning to maintain capacity. GPS sync enables frequency reuse across tower sites without guard bands.

Verify PoE budget and mounting hardware

Confirm your switch or injector delivers 802.3at PoE at 56 V to power the radio reliably. The 100/1000BaseT Ethernet interface requires Cat5e or better cabling for full throughput. Ensure the mounting location provides clear line-of-sight to subscriber modules within the supported sector coverage. FCC certification limits operation to US regulatory domains.

Highlights

  • Supports up to 10 subscriber modules per access point
  • Operates across 5150-5970 MHz frequency range for flexible deployment
  • Includes 56 V PoE power supply for simplified installation
  • GPS synchronisation enables coordinated multi-access-point networks
  • 3at compliant 100/1000BaseT interface provides reliable wired connectivity

Specifications

BrandCambium
ModelC058900L132A

Questions about this item

What mounting hardware is required for the ePMP 2000 Access Point Lite?

The unit includes a 56 V PoE injector and uses a standard 802.3at PoE supply; it can also connect to a CMM4 with a 5 pin to 7 pin cross-over cable adapter.

How do I install the ePMP 2000 Access Point Lite and what step is often missed?

Connect the AP to the 56 V PoE injector or 802.3at switch, then align the sector antenna; the GPS sync requires a clear sky view for the internal receiver to lock satellites.

What maintenance will the ePMP 2000 Access Point Lite need over time?

The AP supports up to 10 Subscriber Modules; firmware updates should be applied periodically to maintain interference filtering performance across the 5150-5970MHz range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.