We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten stainless-steel mounting brackets with screws and hose clamps for pole or wall use

Cambium Networks

Cambium Networks ePMP 1000 Connectorized Radio Mounting Bracket 10 Pack

SKU CH-5TVV-4113Z

Pack of ten stainless-steel brackets with screws and hose clamps for pole or wall mounting ePMP 1000 connectorized radios

  • TypeConnectorized Radio Mounting Bracket
  • Mount ePMP 1000 radios on poles or walls
  • Ten brackets included for multi-site deployments
  • Four 4.2×38 mm stainless-steel screws per bracket
  • Two 50–70 mm stainless-steel hose clamps supplied
  • Compatible with GPS-synchronised and unsynchronised connectorised radios

Mounting Bracket for ePMP 1000 Radios

This pack contains ten mounting brackets built for Cambium Networks ePMP 1000 connectorized radios. Each bracket supports both GPS synchronized and unsynchronized radio versions. The hardware suits wireless network installers who need to deploy multiple sector or point-to-point units on poles or walls. It is not for users mounting non-connectorized radios or equipment from other vendors.

Stainless Steel Hardware for Pole or Wall Mounting

Every bracket includes four 4.2x38 mm stainless steel screws compliant with DIN 7982 C and two stainless steel hose clamps sized 50-70 mm. The clamps secure the assembly to poles within that diameter range while the screws fasten the radio to the bracket. Stainless steel construction resists corrosion in outdoor environments. Installers do not need to source separate mounting fixings.

Passive Mechanical Design with No Power Requirements

The bracket is a passive mechanical accessory with no electronic components, fans or power draw. It adds no noise or heat to the installation and requires no electrical connection. Thermal performance depends entirely on the mounted radio and its environment. The pack provides enough brackets for ten separate radio sites.

Highlights

  • Mount ePMP 1000 radios on poles or walls
  • Ten brackets included for multi-site deployments
  • Four 4.2×38 mm stainless-steel screws per bracket
  • Two 50–70 mm stainless-steel hose clamps supplied
  • Compatible with GPS-synchronised and unsynchronised connectorised radios

Specifications

BrandCambium Networks
ModelePMP 1000
TypeConnectorized Radio Mounting Bracket

Questions about this item

Which mounting standard does the ePMP 1000 bracket use for pole attachment?

The bracket includes two stainless-steel hose clamps adjustable from 50 mm to 70 mm diameter, covering most common pole sizes for outdoor radio installs.

What hardware is required to secure the bracket to a wall?

Four stainless-steel 4.2 × 38 mm screws to DIN 7982 C are supplied; you only need appropriate wall plugs or anchors for your substrate.

How do you avoid misaligning the radio when fitting the bracket?

Mount the bracket to the pole or wall first, tighten the hose clamps or wall screws fully, then slide the ePMP 1000 connectorized radio into the bracket and lock it down — attaching the radio before the bracket is fixed is the common error.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.