We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Polished 316 stainless steel reducing bushing, threaded, 2 11/32 in long

CALBRITE

CALBRITE S62000FB07 Reducing Bushing 3/4 to 2in 316 SS conduit

SKU CH-8K1A-27BH3

Reducing bushing connects 3/4 in. conduit to 2 in. trade sizes using 316 stainless steel with NPS and NPT threads

  • TypeConduit & Raceways
  • 316 stainless steel resists corrosion in harsh environments
  • Reduces conduit from 2 in to 3/4 in trade size
  • Threaded NPS and NPT connection ensures secure fit
  • Polished finish protects surface and simplifies cleaning
  • Weighs .92 lb for manageable handling

Reducing Bushing for Conduit Downsizing

The CALBRITE S62000FB07 is a 316 stainless steel reducing bushing designed to connect 3/4 inch conduit to a 2 inch trade size. It suits electrical installers working with rigid metal or intermediate metal conduit who need a durable, corrosion-resistant transition. The polished finish and threaded NPS/NPT connections provide a secure fit for industrial and commercial raceway systems.

Replacing Improvised Reducers

This fitting replaces makeshift reducer assemblies or mismatched fittings that compromise conduit integrity. The jump is worth it when a project demands a single, code-compliant component rated for both RMC and IMC types. It eliminates the need for multiple couplings and reduces potential leak paths in wet or corrosive environments where 316 stainless steel outperforms standard plated alternatives.

Sustained Load Performance

Under continuous mechanical stress and thermal cycling, the 316 stainless construction resists galling and thread deformation better than softer alloys. The 0.92 lb mass and 2 11/32 in overall length indicate substantial wall thickness that maintains alignment when conduit runs expand or vibrate. Polished surfaces reduce friction during wire pulls, preventing insulation damage over long installation lifecycles.

Highlights

  • 316 stainless steel resists corrosion in harsh environments
  • Reduces conduit from 2 in to 3/4 in trade size
  • Threaded NPS and NPT connection ensures secure fit
  • Polished finish protects surface and simplifies cleaning
  • Weighs .92 lb for manageable handling

Specifications

BrandCalbrite
TypeConduit & Raceways

Questions about this item

What clearance is needed for the 2 11/32 in overall length and 1 in overall height of this reducing bushing?

The bushing measures 2 11/32 in overall length and 1 in overall height, so allow at least that much space inside the enclosure or junction box for the 316 stainless steel body to seat fully.

Which thread standard applies when threading the 2 in to 3/4 in NPS/NPT connection, and what step is often missed?

Both NPS and NPT threads are cut on the fitting; the common error is starting the larger 2 in side without cleaning the conduit threads first, which can cross-thread the 316 SS reducer.

When should the polished 316 stainless steel reducer be inspected or replaced in a corrosive environment?

Inspect the polished 316 SS surfaces annually for pitting or thread galling; replace the bushing if the 0.92 lb body shows visible corrosion or if the NPS/NPT threads no longer seal tightly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.