CALBRITE
CALBRITE S620002S00 Two-Hole Conduit Strap 2 in 316 Stainless Steel
Secures 2 in conduit with a two-hole, 316 stainless steel strap rated for 275 lb load capacity
- TypeCable Management & Conduit
- Supports 275 lb load for secure conduit mounting
- 316 stainless steel resists corrosion in harsh environments
- Fits 2 in IMC and RMC conduit trade sizes
- Two 0.25 in mounting holes simplify installation
- Polished finish adds durability for indoor or outdoor use
CALBRITE S620002S00 Conduit Strap
This CALBRITE two-hole conduit strap secures 2-inch IMC or RMC pipe runs in commercial and industrial electrical installations. The 316 stainless steel construction suits indoor and outdoor environments where corrosion resistance is required. It is intended for electricians and facility managers fastening rigid conduit to structural surfaces.
Polished 316 stainless steel build
The strap has an overall length of 5 5/16 in, overall width of 1 1/4 in and overall height of 2 3/8 in. Two mounting holes of 0.25 in diameter accept quarter-inch fasteners for attachment to walls, ceilings or strut channels. A polished finish adds further protection against chemical and weather exposure in harsh locations.
Check conduit type and load before ordering
Verify that the conduit is 2-inch IMC or RMC, as the clamp is sized for that trade size only. Confirm the mounting surface can accept 0.25 in hardware and that the 275 lb load capacity meets the mechanical demands of the installation. Buyers needing straps for EMT, PVC or larger trade sizes must select a different model.
Highlights
- Supports 275 lb load for secure conduit mounting
- 316 stainless steel resists corrosion in harsh environments
- Fits 2 in IMC and RMC conduit trade sizes
- Two 0.25 in mounting holes simplify installation
- Polished finish adds durability for indoor or outdoor use
Specifications
| Brand | CALBRITE |
|---|---|
| Type | Cable Management & Conduit |
Questions about this item
What load does the 316 stainless two-hole strap support in practice?
The strap is rated for a 275 lb load capacity when securing 2 in conduit or pipe.
What mounting hardware fits the 0.25 in holes on this conduit strap?
Use 1/4 in diameter bolts or screws; the two mounting holes are spaced for standard 2 in conduit installations.
How do you install the CALBRITE S620002S00 strap without misaligning the conduit?
Mark both hole centres, drill 1/4 in clearance holes, then fasten evenly so the 2 in conduit sits centred in the polished 316 stainless cradle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Thomas & Betts TY523M Cable Tie 18lb 4in Natural Nylon Stainless Steel Locking Clip Pack 100
CALBRITE S60700FDCC Weatherproof Electrical Box 5.90" x 2.83" 25 cu in
- Electrical Boxes &…
HOFFMAN A12P10G Interior Panel Steel 10.75in H 8.88in W 14 Gauge
- Electrical Boxes &…



