We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black 120mm frame 25mm deep three-wire connector

CAFELE

CAFELE A12025-12CB-3BN-F1 120mm 12V 0.16A 25mm 3-wire case fan

SKU CH-M6C8-ZWTEM MPN A12025-12CB-3BN-F1

120 mm case fan moves 38.6 CFM at 1000 RPM while running at 21 dB-A noise

  • TypeCase Fan
  • Efficient cooling with 38.6 CFM airflow at 1000 RPM
  • Quiet 21 dB-A operation keeps system noise minimal
  • Low 1.92 W draw from 12 V 0.16 A supply
  • Standard 120 mm frame fits most chassis layouts
  • 3-wire connector enables basic speed monitoring

120 mm 12 V case fan

The CAFELE A12025-12CB-3BN-F1 is a 120 mm square frame fan designed for standard case mounting points. It operates at 12 V and draws 0.16 A for a rated power of 1.92 W. The 25 mm thickness fits typical chassis clearance. It is suited for builders adding or replacing a single exhaust or intake fan.

3-wire connection and 1000 RPM speed

The three-wire lead supplies power and a tachometer signal for motherboard speed monitoring without PWM control. Fixed rotation at 1000 RPM delivers 38.6 CFM of airflow. Acoustic output is rated at 21 dB-A, keeping background noise low in quiet builds.

Straightforward screw mounting

Four corner holes accept standard M3 screws supplied with most cases. No special brackets or adapters are required. The 3-wire connector must match a 3-pin or 4-pin header; it will not provide PWM speed regulation on a 4-pin header. Builders needing variable speed control should verify motherboard voltage-control support.

Highlights

  • Efficient cooling with 38.6 CFM airflow at 1000 RPM
  • Quiet 21 dB-A operation keeps system noise minimal
  • Low 1.92 W draw from 12 V 0.16 A supply
  • Standard 120 mm frame fits most chassis layouts
  • 3-wire connector enables basic speed monitoring

Specifications

TypeCase Fan

Questions about this item

Will the sleeve or ball bearings in the A12025-12CB-3BN-F1 need lubrication or replacement after long use?

The 3-wire fan runs at 1000 RPM on 12 V drawing 0.16 A, so bearing wear is the only moving-part maintenance; plan to replace the unit if noise rises above the rated 21 dB-A.

What limit appears first when the 120 mm fan runs continuously at 1000 RPM?

The fixed 1.92 W power draw and 38.6 CFM airflow set the thermal ceiling; sustained loads that exceed this airflow will raise case temperatures before the fan itself throttles.

How much noise and heat does the 12 V 0.16 A fan add during all-day operation?

At full speed it emits 21 dB-A and dissipates 1.92 W, so acoustic impact stays low and the motor’s own heat is negligible inside a ventilated chassis.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.