CAFELE
CAFELE 3110KL-05W-B59 8025 24V 0.15A 3250 RPM case fan
An 80 mm square, 25 mm thick case fan running at 3250 rpm on 24 V DC to deliver 38.8 CFM at 34 dB
- TypeCase Fan
- Runs at 3250 rpm for strong airflow
- 8 CFM air volume moves heat efficiently
- Quiet 34 dB noise level suits silent builds
- 80 mm square frame fits standard mounts
- 24 V 0.15 A draws minimal power
Compact 80 mm case fan for 24 V systems
The CAFELE 3110KL-05W-B59 is an 80 mm square frame fan designed for equipment that runs on a 24 V DC supply. It draws 0.15 A and spins at 3250 rpm to deliver 38.8 CFM of airflow at 34 dB. This unit suits industrial enclosures, frequency converters or any build that requires a 24 V cooling source.
Three-wire connection and 8025 mounting footprint
The fan uses a standard three-wire lead for power and speed reporting, so the host can monitor rotation without extra sensors. Its 80 mm by 80 mm by 25 mm body matches the common 8025 mounting pattern, letting it drop into existing screw holes on panels or chassis walls. No proprietary brackets or adapters are needed for installation.
Original specification replaces worn units directly
Supplied as an exact-match replacement part, the fan restores the original cooling performance without firmware changes or wiring modifications. Builders who need a different voltage, a larger frame or higher static pressure will need a different model, as this unit is fixed at 24 V and the 8025 form factor.
Highlights
- Runs at 3250 rpm for strong airflow
- 8 CFM air volume moves heat efficiently
- Quiet 34 dB noise level suits silent builds
- 80 mm square frame fits standard mounts
- 24 V 0.15 A draws minimal power
Specifications
| Type | Case Fan |
|---|
Questions about this item
At 3250 RPM will the 80 × 80 × 25 mm frame hit its airflow ceiling before the rest of the system?
The fan moves 38.8 CFM at 3250 RPM; sustained load is limited by that airflow figure and the 80 mm mounting footprint.
What noise and heat should I expect from the 24 V 0.15 A motor running continuously?
Rated noise is 34 dB at 3250 RPM; power draw is 24 V × 0.15 A, so waste heat stays low during all-day operation.
My chassis only has 4-pin PWM headers — can I plug this 3-wire 8025 fan straight in?
The fan uses a 3-wire connection; it will run at full 3250 RPM on a 4-pin header but PWM speed control will not be available.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



