We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper-plated steel riser clamp, 3/4 inch tube size, 9.25 inches long

Caddy

Caddy 5110075CP EZ-Riser Riser Clamp 3/4 In 255 lb

SKU CH-CSGK-4117V

Steel riser clamp with copper-plated finish supports 3/4 inch copper tube up to 255 lb load capacity

  • MaterialHAWA
  • Copper-plated steel resists corrosion on copper tubing
  • 255 lb load capacity supports heavy riser runs
  • MSS SP-58 Type 8 compliance meets piping standards
  • 25 in overall length fits standard installations
  • .438 in mounting hole aligns with common hardware

Copper-plated riser clamp for 3/4 in tube

The Caddy 5110075CP EZ-Riser clamp is made for securing copper tube with a 3/4 in nominal size and a maximum outside diameter of 7/8 in. Its steel body carries a copper-plated finish and meets MSS SP-58 Type 8 and WW-H-171 Type 8 standards. It suits installers who need a listed riser support for this tube size.

75 lb load capacity at the mounting point

The clamp is rated for a maximum load of 75 lb, which is the decisive figure when matching the support to the system design. The mounting hole diameter is 0.438 in and the bolt supplied measures 3/8 in diameter by 1 1/4 in long. If the calculated load exceeds 75 lb this clamp cannot be used.

Bolt-on installation with fixed bolt length

The clamp fastens with the included 3/8 in bolt, so no separate hardware is required. Overall dimensions are 9.25 in long by 1 in high by 1 in wide, leaving little room for adjustment once positioned. Installers must verify the 0.438 in mounting hole aligns with the structure before tightening, as the bolt length cannot be changed.

Highlights

  • Copper-plated steel resists corrosion on copper tubing
  • 255 lb load capacity supports heavy riser runs
  • MSS SP-58 Type 8 compliance meets piping standards
  • 25 in overall length fits standard installations
  • .438 in mounting hole aligns with common hardware

Specifications

MaterialHAWA
BrandCADDY

Questions about this item

What does the 255 lb figure represent on the EZ-Riser clamp?

The 255 lb value is the maximum load rating shown in the supplier title for the riser clamp.

How does the MSS SP-58 Type 8 standard relate to the clamp's interface?

The clamp meets MSS SP-58 Type 8 and WW-H-171 Type 8 standards for riser clamp dimensions and load testing.

What physical dimensions determine whether the clamp fits a 3/4 in copper tube?

The clamp is sized for 3/4 in copper tube with a maximum 7/8 in outside diameter and uses a 3/8 in bolt with 0.438 in mounting holes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.