Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00937148BTC
In stock
Caddy
Caddy 16M24 Conduit Clip 1 in EMT 75 lb 360°
Hammer-on beam clip holds 1 in EMT conduit, rotates 360° and supports 75 lb load
- TypeCable Management & Conduit
- Secure 1 in EMT conduit with 75 lb load rating
- 360° rotation allows flexible positioning after mounting
- Hammer-on installation fits 1/8 to 1/4 in flanges
- Snap-close design holds cable OD 1.18 to 1.38 in
- Corrosion-resistant zinc phosphate coating protects steel body
Caddy 16M24 Conduit Clip
The Caddy 16M24 is a steel beam clip designed to secure EMT, RMC, and pipe with a one inch trade size. It mounts by hammering onto flanges between one eighth and one quarter inch thick. A zinc phosphate coating provides corrosion resistance for indoor and outdoor electrical installations.
Replaces welded or bolted hangers
This clip eliminates drilling and welding when attaching conduit to structural steel. The snap-close mechanism and 360 degree rotation allow quick alignment on site. The upgrade is worth it when labour savings and adjustment speed outweigh the cost of traditional fixed hangers.
Hammer-on install with snap close
Installation requires only a hammer to seat the clip on the beam flange. The conduit then snaps into the rotating saddle for a secure hold. Common issues include using the clip on flanges outside the specified thickness range or exceeding the 75 lb load limit, which can cause detachment.
Highlights
- Secure 1 in EMT conduit with 75 lb load rating
- 360° rotation allows flexible positioning after mounting
- Hammer-on installation fits 1/8 to 1/4 in flanges
- Snap-close design holds cable OD 1.18 to 1.38 in
- Corrosion-resistant zinc phosphate coating protects steel body
Specifications
| Type | Cable Management & Conduit |
|---|---|
| Brand | NVENT CADDY |
Questions about this item
What flange thickness does the 16M24 clip accept for hammer-on mounting?
The clip mounts on flanges from 1/8 in to 1/4 in thick using a hammer-on action.
How does the snap-close feature work during installation, and what step is often missed?
After hammering the clip onto the flange, rotate the conduit into the saddle and press until the snap-close latch engages; the missed step is confirming the latch clicks fully shut.
When should the corrosion-resistant coating be inspected or the clip replaced?
Inspect the gray coating periodically for wear or damage; replace the clip if the coating is compromised or if the 75 lb load capacity can no longer be trusted.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
