We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel loop hanger, curved U shape with threaded rod ends

Caddy

Caddy 1050150S4 Loop Hanger 1-1/2 In 304 Stainless Steel

SKU CH-WPRV-ZNW62

Stainless steel loop hanger for 1-1/2 inch pipe, rated 610 lb load, meets MSS SP-58 and federal spec WW-H-171

  • 304 stainless steel resists corrosion in demanding environments
  • Supports stationary stainless steel pipe lines up to 610 lb load
  • Meets Federal Specification WW-H-171 Type 7 and MSS SP-58 Type 7 standards
  • Metal detectable construction aids safety compliance in sensitive areas
  • 3/8 inch rod and thread size simplifies installation alignment

Stainless Steel Loop Hanger for 1-1/2 Inch Pipe

The Caddy 1050150S4 is a 304 stainless steel loop hanger sized for 1-1/2 inch pipe suspension. It is built for stationary stainless steel pipe lines in plumbing and industrial settings. The hanger carries a maximum load of 610 pounds.

Standards Compliance for Pipe Support

This hanger meets Federal Specification WW-H-171 Type 7 and MSS SP-58 Type 7 standards. The 3/8 inch rod and thread size match common support hardware. Metal detectable construction adds traceability for sensitive environments.

610 Pound Maximum Load Rating

The 610 pound load capacity is the key specification for selecting this hanger. Installers must verify that the total pipe weight including contents stays within this limit. It is not suited for heavier pipe systems exceeding this rating.

Highlights

  • 304 stainless steel resists corrosion in demanding environments
  • Supports stationary stainless steel pipe lines up to 610 lb load
  • Meets Federal Specification WW-H-171 Type 7 and MSS SP-58 Type 7 standards
  • Metal detectable construction aids safety compliance in sensitive areas
  • 3/8 inch rod and thread size simplifies installation alignment

Specifications

BrandNVENT CADDY

Questions about this item

Will the 304 stainless steel hanger need replacement due to corrosion in a typical plumbing environment?

The 304 stainless steel construction resists corrosion under normal conditions, so the hanger itself should not require replacement for material degradation.

What is the maximum load the hanger can support before the 610 lb limit is reached?

The maximum recommended load is 610 lb; exceeding this limit risks structural failure of the hanger.

Does the metal detectable feature add any heat or noise during continuous operation?

The metal detectable property is a material characteristic for identification purposes and does not generate heat or noise.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.