Cables To Go
Cables To Go 52157 6 ft serial cable DB9 M/F 28 AWG 1.25 in low profile CMG
A 6 ft DB9 male-to-female serial cable with 1.25 in low-profile connectors, 28 AWG wiring and CMG in-wall rating for RS-232 links
- TypeOthers
- ColorBlack
- Length6 ft.
- Connector Number2
- Connector DetailDB9 Male to DB9 Female
- Terminal GenderMale to Female
- CMG rating approved for in-wall installation
- Low-profile connectors only 1.25 in deep save gang-box space
- Rounded connector shape fits tight monitor mounts
- Fully shielded construction blocks EMI/RFI on RS-232 links
- Thumbscrew connectors give fast, secure DB9 mating
Serial cable for in-wall AV installs
This six-foot RS-232 cable carries a CMG rating for in-wall use in schools and commercial buildings. Low-profile DB9 connectors measure 1.25 inches deep to fit tight gang boxes and small monitor mounts. The 28 AWG conductors are fully shielded against EMI and RFI interference. All nine lines are wired straight through for standard serial communication.
Sustained signal integrity over distance
Shielding and straight-through wiring maintain clean RS-232 signalling across the full six-foot run. The moulded strain relief prevents conductor fatigue when the cable is routed through conduit or behind walls. Thumbscrew connectors keep the link secure during long-term operation without signal drop-out. Performance stays consistent in permanent installations.
Thermals noise and power in normal use
As a passive copper cable it generates no heat and draws no power of its own. Operation is completely silent because there are no active components or fans. The CMG jacket meets in-wall fire-safety requirements without adding thermal load. Installers can route it alongside other low-voltage wiring without thermal concerns.
Highlights
- CMG rating approved for in-wall installation
- Low-profile connectors only 1.25 in deep save gang-box space
- Rounded connector shape fits tight monitor mounts
- Fully shielded construction blocks EMI/RFI on RS-232 links
- Thumbscrew connectors give fast, secure DB9 mating
Specifications
| Brand | C2G |
|---|---|
| Model | 52157 |
| Type | Others |
| Color | Black |
| Length | 6 ft. |
| Connector Number | 2 |
| Connector Detail | DB9 Male to DB9 Female |
| Terminal Gender | Male to Female |
| Features | Low Profile Connector Length: 1.25 in. Rounded Connector fits 1.25 in. I.D. mounts 28 AWG |
| Shipping weight | 0.10 kg |
| Package size | 140 × 114 × 13 mm |
Questions about this item
Does the 28 AWG cable run hot or draw extra power when left connected all day?
It is a passive serial cable with no active electronics, so it generates no heat and consumes no power during continuous use.
What must the installer already have for the DB9 male-to-female ends to work?
The cable connects directly to standard DB9 ports; the only requirement is that both devices present a matching DB9 interface.
Will the 1.25 in low-profile connectors fit alongside older RS-232 equipment in a tight gang box?
Yes, the 1.25 in depth and rounded shape are designed to sit flush in standard mounts and clear smaller monitor brackets used with legacy serial gear.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



