Cables To Go
Cables To Go 50634 HDMI Cable 35 ft Male to Male
A 35 ft in-wall CL2-rated HDMI cable with Ethernet, gold-plated connectors and double shielding supporting 4K at 30 Hz
- TypeHDMI Cables
- ColorBlack
- Length35 ft
- Cable Length35 ft.
- Connector Number2
- Connect From1 x HDMI
- Supports 4K at 30 Hz for sharp Ultra HD viewing
- CL2-rated jacket approved for safe in-wall installation
- Gold-plated connectors resist corrosion for lasting signal quality
- Double foil-and-braid shielding blocks interference for clean audio and video
- 35 ft length connects distant devices without signal loss
35 ft HDMI cable with Ethernet
This 35-foot male-to-male HDMI cable connects displays, projectors and source devices over long runs. It meets HDMI 1.4 specifications and carries an Ethernet channel for network-enabled equipment. The CL2-rated jacket allows in-wall installation in homes, schools and commercial buildings. Gold-plated connectors resist corrosion for reliable signal transfer.
4K at 30 Hz headroom and limits
The cable supports 4K resolution at 4096 x 2160 up to 30 Hz with 4:4:4 chroma, plus 3D, Deep Color and high-bitrate audio formats such as Dolby TrueHD and DTS-HD Master Audio. Bandwidth above HDMI 1.4 — including 4K at 60 Hz, HDR metadata or variable refresh rates — is not supported. Runs longer than 35 ft would require an active or fibre solution.
CL2 jacket and double shielding daily impact
A foil-and-braid shield blocks electromagnetic interference that can corrupt video and audio on extended runs. The fire-resistant CL2 jacket satisfies building-code requirements for in-wall routing without conduit. Male Type A connectors on both ends plug directly into standard HDMI ports, so no adapters or gender changers are needed for typical installations.
Highlights
- Supports 4K at 30 Hz for sharp Ultra HD viewing
- CL2-rated jacket approved for safe in-wall installation
- Gold-plated connectors resist corrosion for lasting signal quality
- Double foil-and-braid shielding blocks interference for clean audio and video
- 35 ft length connects distant devices without signal loss
Specifications
| Brand | C2G |
|---|---|
| Model | 50634 |
| Type | HDMI Cables |
| Color | Black |
| Length | 35 ft |
| Cable Length | 35 ft. |
| Connector Number | 2 |
| Connect From | 1 x HDMI |
| Connect To | 1 x HDMI |
| Connector Detail | Connector on First End:1 x HDMI (Type A) Male Digital Audio/Video Connector on Second End:1 x HDMI (Type A) Male Digital Audio/Video |
| Terminal Gender | Male to Male |
| Features | Supports all HDMI 1.4 features including resolutions up to 4K (4096 x 2160 at 30Hz, 4:4:4) In-wall, CL2-rated jacket Gold plated connectors |
| Shipping weight | 1.23 kg |
| Package size | 203 × 191 × 76 mm |
Questions about this item
Will the 35 ft length and HDMI 1.4 spec work with my older 1080p projector and AV receiver?
Yes, the cable is fully backward compatible with 1080p and earlier HDMI versions, so your existing projector and receiver will operate normally at their native resolutions.
How can I verify the cable is delivering 4K at 30 Hz after installation?
Check the source device’s output settings and the display’s info menu; both should report 4096 x 2160 at 30 Hz with 4:4:4 colour sampling when playing 4K content.
Does the box include the CL2-rated 35 ft cable with gold-plated HDMI male connectors on both ends, or do I need anything else?
The package contains the 35 ft CL2-rated HDMI cable with gold-plated male connectors on each end; no additional adapters or accessories are required for a standard HDMI-to-HDMI connection.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.0011546BTC
In stock
