Cables To Go
Cables To Go 50212 VGA Cable Male/Male 6 ft 1.82 m In-Wall CMG-Rated Black
A 1.82 m in-wall CMG-rated VGA cable with male-to-male connectors supporting 2048 x 1536 resolution
- TypeCable Connectors
- ColorBlack
- Length6 ft.
- Connector Number2
- Connector DetailVGA Video Cable M/M
- Terminal GenderMale to Male
- In-wall CMG-rated jacket meets building-code fire requirements
- Supports 2048 x 1536 resolution for sharp analogue video
- All 15 pins wired for DDC2 and EDID communication
- Low-profile connectors fit tight spaces behind displays
- 6 ft (1.82 m) length suits typical desktop runs
VGA cable for permanent in-wall runs
This six-foot male-to-male VGA cable carries a CMG-rated jacket approved for in-wall installation. It connects two VGA ports such as a computer and a projector or display. The black cable weighs 226.8 g and uses low-profile connectors to fit tight spaces.
Resolution and signal limits of the VGA interface
The cable supports a maximum resolution of 2048x1536 pixels with all 15 pins wired for DDC2 and EDID communication. Nominal impedance is 75+/-5 Ohm and capacitance is 28 pF per metre. Conductor resistance varies between 376.96 Ohm per kilometre at 30 AWG and 237.25 Ohm per kilometre at 28 AWG. Insulation resistance is rated at 10 MOhm per kilometre.
Straightforward plug-in with one common snag
Installation is a simple push of each DE-15 connector into its port; no tools or drivers are required. The low-profile shells help when clearance behind equipment is limited. The main issue installers encounter is the thumb screws loosening over time, especially where vibration occurs, so they should be checked periodically.
Highlights
- In-wall CMG-rated jacket meets building-code fire requirements
- Supports 2048 x 1536 resolution for sharp analogue video
- All 15 pins wired for DDC2 and EDID communication
- Low-profile connectors fit tight spaces behind displays
- 6 ft (1.82 m) length suits typical desktop runs
Specifications
| Brand | C2G |
|---|---|
| Model | 50212 |
| Type | Cable Connectors |
| Color | Black |
| Length | 6 ft. |
| Connector Number | 2 |
| Connector Detail | VGA Video Cable M/M |
| Terminal Gender | Male to Male |
| Specifications | FeaturesColour of productBlackGenderMale/MaleCable length72" (1.829m)Connector 1VGA (D-Sub)Connector 2VGA (D-Sub)Maximum resolution2048 x 1536 pixelsWeight & dimensionsWeight226.8g |
| Features | Electrical characteristics Maximum resolution supported: 2048x1536 Nominal impedance: 75+/-5O Nominal capacitance: 28pF/m Conductor resistance: 30AWG - 376.96O/km, 28AWG - 237.25O/km Insulation resistance: 10MO/km at 20 degree C DC-500V Dielectric strength: AC 500V/1 minute Voltage rating: 30V Minimum bend radius: 85mm Conductors (3 conductors): Conductor type: 30AWG (7/0.127)(tinned copper(OFC)) Insulation: Foam-PE Covering: PVC Drain wire: 28AWG (7/0.127)(tinned copper) Shield: Aluminum foil (100% coverage) Conductor (9 conductors): Conductor type: 28AWG (7/0.127)(tinned copper(OFC |
| Cable Length | 0.5 ft. |
| Shipping weight | 0.23 kg |
| Package size | 203 × 140 × 25 mm |
Questions about this item
Should I pick a longer or shorter VGA cable for my 1.82 m run?
This 72 in cable matches a 1.82 m distance; choose a longer one only if the path requires extra slack for routing around obstacles.
Will the 2048 x 1536 pixel rating handle my monitor's native resolution?
The cable supports up to 2048 x 1536 pixels, so it will carry any VGA signal at or below that resolution without loss from the cable itself.
What does the CMG rated jacket allow for installation?
The CMG rated jacket is approved for in wall runs, letting you route the cable through stud cavities or conduit behind drywall.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



