Cables To Go
Cables To Go 40067 25 ft 1/4in Male to Male instrument cable
A 25 ft unbalanced audio cable with 1/4 in male connectors on both ends, using 22 AWG copper conductors under foil and 60 % copper braid shielding, a 7 mm ultra-flexible PVC jacket.
- TypeOthers
- ColorBlack
- Length25 ft
- Connector Number2
- Terminal GenderMale to Male
- ConductorCopper Conductor
- Connects guitars, keyboards, mixers and amps with 1/4in unbalanced I/O
- 25 ft length gives stage reach without excess slack
- Ultra-flexible 7 mm PVC jacket resists kinks in tight setups
- Double foil and 60 % copper braid shield blocks noise interference
- Nickel-plated brass plugs with spring strain relief protect solder joints
25 ft instrument cable for unbalanced audio
This 25-foot cable connects unbalanced line or microphone-level outputs from mixing consoles, keyboards or amplifiers to unbalanced inputs on recorders or other gear. It uses a 22 AWG twisted-pair copper conductor wrapped in an aluminum foil shield and 60 percent copper braid to reject noise. The 7 mm PVC jacket stays flexible for routing around equipment.
Male-to-male 1/4-inch plugs with strain relief
Each end carries a 1/4-inch male connector with a nickel-plated solid brass body and a moulded spring strain relief that protects solder joints during repeated plugging and unplugging. The double shielding and flexible jacket let the cable lie flat in tight stage or rack spaces without kinking. No external power or adapter is required.
Nickel-plated connectors
The cable ships with the two moulded connectors already attached; no separate plugs, ferrules or software are supplied. The foil-and-braid shield and flexible jacket are built into the assembly, so the only items you receive are the finished 25-foot cable in C2G-branded packaging.
Highlights
- Connects guitars, keyboards, mixers and amps with 1/4in unbalanced I/O
- 25 ft length gives stage reach without excess slack
- Ultra-flexible 7 mm PVC jacket resists kinks in tight setups
- Double foil and 60 % copper braid shield blocks noise interference
- Nickel-plated brass plugs with spring strain relief protect solder joints
Specifications
| Brand | C2G |
|---|---|
| Model | 40067 |
| Type | Others |
| Color | Black |
| Length | 25 ft |
| Connector Number | 2 |
| Terminal Gender | Male to Male |
| Conductor | Copper Conductor |
| Features | Connector 1: 1/4in Male Connector 2: 1/4in Male Weight: 1.1 lbs. Connect line or mic level outputs from mixing consoles to recorders and amplifiers with unbalanced inputs. Use this 1/4in to 1/4in cable to connect unbalanced line outputs to unbalanced line inputs. This pro-audio cable is made from 22 AWG twisted pair audio cable under an aluminum foil shield and 60% copper braid for maximum shielding from noise. The highly flexible 7mm PVC jacket reduces the risk of the cable kinking and damaging the conductors. Bright nickel plating on solid brass connectors resists wear from reconfi |
| Shipping weight | 0.43 kg |
| Package size | 178 × 165 × 38 mm |
Questions about this item
How far can the 25 ft length reach before signal loss becomes noticeable?
The 25 ft cable uses 22 AWG twisted pair conductors with foil and 60% copper braid shielding to maintain signal integrity over its full length for unbalanced line-level connections.
Does the 7 mm PVC jacket stay flexible and cool during all-day stage use?
The ultra-flexible 7 mm PVC jacket resists kinking and heat buildup, while nickel-plated brass connectors and spring strain relief withstand repeated plugging and movement.
Which unbalanced 1/4 in devices must I already own to use this male-to-male cable?
You need two pieces of gear with unbalanced 1/4 in female jacks — such as a guitar amp, mixer, keyboard, or power amplifier — to connect line or mic level outputs to inputs.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



