Cables To Go
Cables To Go 40027 75 Ohm RG59 BNC Cable Male to Male 12 ft 3.65 m Black
75 ohm RG59 BNC male-to-male video cable, double-shielded with 60% copper braid over foil, 12 ft (3.65 m) black PVC jacket, nickel-plated connectors, moulded strain relief
- TypeCable Connectors
- ColorBlack
- Length12 ft.
- Connector Number2
- Terminal GenderMale to Male
- SpecificationsConnector 1: BNC Male Connector 2: BNC Male Jacket: PVC
- Double-shielded coax blocks noise for clean video
- 75 Ohm RG59/U impedance matches broadcast gear
- Nickel-plated BNC plugs resist corrosion over time
- Molded strain relief protects conductors from bending stress
- 12 ft (3.65 m) reach suits CCTV and studio runs
75 Ohm RG59 BNC Video Cable
This 12 ft BNC male-to-male cable uses 75 Ohm RG59/U coax with double shielding to carry analogue video signals. It is built for CCTV, broadcast, studio, surveillance and home-theatre installations where a 75 Ohm impedance match is required. The PVC jacket and nickel-plated connectors resist corrosion and provide strain relief during repeated hook-ups.
Installers needing 75 Ohm analogue video links
It suits installers who need a ready-made 75 Ohm BNC patch lead for composite video, SDI baseband or RF distribution up to the cable's rated frequency. It is not suited for applications that require a different characteristic impedance or for digital data protocols that demand controlled-impedance twisted-pair or fibre media. Buyers needing longer runs, different connector genders or plenum-rated jackets should look at other cable types.
75 Ohm characteristic impedance
The single specification that decides fit is the 75 Om characteristic impedance of the RG59/U coax. Match this to the 75 Ohm inputs and outputs of your cameras, monitors, switchers or distribution amplifiers; a mismatch will cause reflections and degraded picture quality.
Highlights
- Double-shielded coax blocks noise for clean video
- 75 Ohm RG59/U impedance matches broadcast gear
- Nickel-plated BNC plugs resist corrosion over time
- Molded strain relief protects conductors from bending stress
- 12 ft (3.65 m) reach suits CCTV and studio runs
Specifications
| Brand | C2G |
|---|---|
| Model | 40027 |
| Type | Cable Connectors |
| Color | Black |
| Length | 12 ft. |
| Connector Number | 2 |
| Terminal Gender | Male to Male |
| Specifications | Connector 1: BNC Male Connector 2: BNC Male Jacket: PVC |
| Shielding | Double-shielded |
| Features | A high quality BNC cable for video applications including CCTV, broadcast, studio, boardroom presentations, home theater, etc. Manufactured from 75 Ohm RG59/U dual shield coax cable (60% copper braid over foil) with a 22 AWG copper-covered steel center conductor. Finished with bright nickel-plated BNC connectors that have molded PVC strain relief to protect the cable from wear over time. |
| Shipping weight | 0.19 kg |
| Package size | 204 × 174 × 57 mm |
Questions about this item
What video standard does the 75 Ohm RG59 BNC cable support in practice?
The 75 Ohm RG59/U coax carries standard-definition and HD-SDI video cleanly over the 12 ft run.
What clearance is needed for the moulded BNC male connectors on this 40027 cable?
Each moulded BNC male plug needs roughly 40 mm straight-back clearance to seat without bending the 3.65 m jacket.
How do you seat the BNC male plugs on this double-shielded cable without damaging the centre pin?
Align the bayonet slots, push straight in, then twist the knurled collar a quarter-turn until it clicks; forcing the pin sideways bends it.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



