Cables To Go
Cables To Go 40025 BNC Cable 75 Ohm RG59 3 ft 0.91 m Black Male Male Double Shielded
A 75 Ohm RG59 BNC cable with double shielding and nickel-plated male connectors for reliable video signals in CCTV, broadcast and home theatre runs
- TypeCable Connectors
- ColorBlack
- Length3 ft.
- Connector Number2
- Connector DetailConnector 1: BNC Male Connector 2: BNC Male
- Terminal GenderMale to Male
- Reliable video links for CCTV and broadcast with 75 Ohm RG59 coax
- Corrosion-resistant nickel-plated BNC connectors withstand repeated connect cycles
- Double foil-and-braid shielding blocks noise interference for clean signals
- Molded strain-relief boots protect conductors from bending damage
- Compact 3 ft length suits tight rack and studio runs
Ideal for CCTV and broadcast video
The Cables To Go 40025 is a 75 Ohm BNC cable built for reliable video signal transfer in CCTV, broadcast, studio, surveillance and home theater systems. Its male-to-male connectors suit direct device-to-device links. The 3 ft length fits short-run installations where excess slack is unwanted.
Double-shielded RG59 coax reduces interference
Manufactured from RG59/U dual-shield coax with 60% copper braid over foil, the cable blocks unwanted noise that can degrade picture quality. The PVC jacket protects the conductors during routing and daily handling. No power draw or active components are present, so thermals and fan noise are not a factor.
Nickel-plated, moulded ends resist wear
Nickel plating on the BNC connectors resists corrosion from repeated mating cycles when equipment is moved or reconfigured. Moulded PVC strain relief guards the termination point against bending stress that can damage the centre conductor. The black finish blends into rack and studio environments.
Highlights
- Reliable video links for CCTV and broadcast with 75 Ohm RG59 coax
- Corrosion-resistant nickel-plated BNC connectors withstand repeated connect cycles
- Double foil-and-braid shielding blocks noise interference for clean signals
- Molded strain-relief boots protect conductors from bending damage
- Compact 3 ft length suits tight rack and studio runs
Specifications
| Brand | C2G |
|---|---|
| Model | 40025 |
| Type | Cable Connectors |
| Color | Black |
| Length | 3 ft. |
| Connector Number | 2 |
| Connector Detail | Connector 1: BNC Male Connector 2: BNC Male |
| Terminal Gender | Male to Male |
| Specifications | Jacket: PVC |
| Shielding | Double-shielded |
| Features | A high quality BNC cable for video applications including CCTV, broadcast, studio, boardroom presentations, home theater, etc. Manufactured from 75 Ohm RG59/U dual shield coax cable (60% copper braid over foil) with a 22 AWG copper-covered steel center conductor. Finished with bright nickel-plated BNC connectors that have molded PVC strain relief to protect the cable from wear over time. |
| Shipping weight | 0.07 kg |
| Package size | 127 × 108 × 6 mm |
Questions about this item
How do I connect the BNC male plugs on this 3 ft cable without damaging the centre pin?
Push each nickel-plated BNC male connector straight onto the female jack until the bayonet lugs click into the locked position; the moulded PVC strain relief prevents the RG59/U centre conductor from bending if the cable is tugged.
Will the double shielding on this RG59/U cable degrade and need replacement?
The 60 % copper braid over foil shield and PVC jacket are passive; they do not wear out, so the cable only needs replacement if the jacket is cut or a connector is physically damaged.
What signal-length limit appears first when running 75 Ohm video through this 0.91 m assembly?
At 0.91 metres the attenuation of the 75 Ohm RG59/U coax is negligible, so the practical limit is the fixed 3 ft length rather than signal loss.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



