We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular surge protector with six outlets, four-foot cord, and three short outlet-saver cables attached

Cables To Go

Cables To Go 39995 6 Outlet 4 ft 270 Joules Surge Protector with 3 x 1 ft Outlet Savers

SKU CH-GY65-VJSYX MPN 39995

Six-outlet surge suppressor with 270 joules of protection, a four-foot cord and three one-foot outlet savers

  • Outlets6
  • Outlets TypeNEMA 5-15 Female
  • Cord Length4 ft.
  • Input Voltage125V
  • Output Watt Capacity1875 Watts
  • AC Suppression Joule Rating270 Joules
  • 6 outlets plus three 1 ft savers keep plugs from blocking each other
  • 270 joule rating absorbs surges before they reach connected equipment
  • EMI/RFI filter cuts noise up to 43 dB for cleaner power
  • 4 ft cord and wall-mount slots let you place the strip where outlets are needed
  • 1875 watt capacity at 125 V handles multiple devices on one strip

Six-outlet surge suppressor for home-office gear

The Cables To Go 39995 provides six NEMA 5-15 receptacles and a four-foot cord rated for 125 volts and 15 amperes. A 270-joule energy dissipation rating and 6,500-volt maximum surge voltage protect connected equipment from damaging spikes. Three outlet-saver extensions add flexibility for bulky power adapters.

EMI/RFI filter cuts noise by 43 dB

Built-in line protection covers hot, neutral and ground conductors while the noise filter reduces electromagnetic and radio-frequency interference by up to 43 decibels. The unit operates at a continuous 1,875-watt capacity and signals active protection with a power LED. Impact-resistant ABS housing is wall-mountable for tidy placement.

Three one-foot outlet savers widen spacing

Each 12-inch extension cord lets large transformer blocks sit side-by-side without blocking adjacent sockets. The suppressor carries model number 39995 and weighs 2.380 pounds. Buyers who need higher joule ratings or coaxial and data-line protection should look at dedicated UPS units or whole-panel suppressors.

Highlights

  • 6 outlets plus three 1 ft savers keep plugs from blocking each other
  • 270 joule rating absorbs surges before they reach connected equipment
  • EMI/RFI filter cuts noise up to 43 dB for cleaner power
  • 4 ft cord and wall-mount slots let you place the strip where outlets are needed
  • 1875 watt capacity at 125 V handles multiple devices on one strip

Specifications

BrandC2G
Model39995
Outlets6
Outlets TypeNEMA 5-15 Female
Cord Length4 ft.
Input Voltage125V
Output Watt Capacity1875 Watts
AC Suppression Joule Rating270 Joules
FeaturesLine Protection: 3 lines (hot, neutral, ground)
Indicators: Power LED
EMI/RFI Noise Reduction: Up to 43 dB
Energy Dissipation: 270 Joules
Electrical Rating: 125 Volts, 15 Amperes, 1875 Watts
Max Surge Voltage: 6,500 Volts
Clamping Time: Less than 1 nanosecond
Maximum Spike Current: 4,500 Amperes
Wall-mountable, impact-resistant ABS plastics keep the unit looking good for years to come.
14 AWG suppressor power cord is 4 feet long.
For indoor use only.
Plus, three outlet saver extension cords are included to keep your surge suppressor and UPS outlets from being blocked by bulky AC tran
Unit Dimensions2.380lbs
Unit Weight2
Shipping weight0.03 kg
Package size127 × 95 × 13 mm

Questions about this item

How do I mount the 39995 surge protector on a wall and which step is commonly missed?

Use the keyhole slots on the ABS housing; the step often missed is pre-drilling level pilot holes so the unit sits flush and the 4 ft cord reaches the wall outlet without tension.

What part of the 39995 will need replacement after it absorbs multiple surges?

The internal metal-oxide varistors that provide the 270 joule rating degrade with each event; once the protection circuit is exhausted the Power LED stays lit but suppression stops, so the whole unit must be replaced.

At what point does the 39995 stop protecting connected gear during a long over-voltage event?

The suppressor clamps transients up to 6500 V, but if the incoming voltage exceeds the 125 V, 15 A, 1875 W rating for a sustained period the thermal fuse opens and protection ends until the unit is replaced.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.