We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 8 ft IEC 60320 C13 to C14 power extension cord

Cables To Go

Cables To Go 29934 8ft 2.4m 16 AWG 250V IEC 60320 C13 C14 internal power cable

SKU CH-2NR3-9V923

Extends an existing IEC C13 power connection by 2.4 m with a 16 AWG, 250 V rated cord featuring fully moulded C14 male to C13 female connectors

  • TypeOthers
  • ColorBlack
  • Extends reach by 8 ft (2.4 m) for flexible device placement
  • 16 AWG conductors rated 250 V deliver reliable power to C13/C14 equipment
  • Fully moulded connectors (IEC 60320 C13 male to C14 female) resist wear for long service life
  • RoHS compliant and TAA compliant for regulated procurement needs
  • Lifetime limited warranty backs the heavy-duty black cord

8 ft 16 AWG IEC 60320 C13 to C14 cable

This 2.4 m black extension cord carries a 250 V rating and uses 16 AWG conductors with fully moulded IEC 60320 C13 male and C14 female ends. It adds length to existing power leads for monitors, scanners, printers and similar equipment that use the standard 3-pin shroud connector. The heavy-duty jacket and lifetime warranty indicate a focus on long-term reliability in indoor environments.

Suits setups needing extra reach between device

Builders routing cables behind rack shelves or across wide desks will appreciate the 8 ft span and moulded strain relief. Buyers who require a right-angle connector, a locking C13 variant or a higher current rating than 16 AWG provides should look at other options. The cord is not designed for outdoor use or for direct connection to a wall outlet without an existing IEC cable.

16 AWG conductor gauge at 250 V rating

The 16 AWG wire size sets the safe continuous current limit for the cable, making it the key figure when matching the cord to the power draw of the connected hardware. Exceeding that limit creates a fire risk regardless of the 250 V insulation rating. Verify the device's nameplate amperage before installing this extension.

Highlights

  • Extends reach by 8 ft (2.4 m) for flexible device placement
  • 16 AWG conductors rated 250 V deliver reliable power to C13/C14 equipment
  • Fully moulded connectors (IEC 60320 C13 male to C14 female) resist wear for long service life
  • RoHS compliant and TAA compliant for regulated procurement needs
  • Lifetime limited warranty backs the heavy-duty black cord

Specifications

BrandCables To Go
TypeOthers
ColorBlack

Questions about this item

Does the 16 AWG 250 Volt C13-C14 extension run hot or draw extra power during continuous use?

The 16 AWG conductors are rated for 250 Volt operation, so the cable handles normal device loads without excess heat or power loss.

What existing cable or outlet must I already have for the IEC 60320 C14 female end to connect?

You need a standard IEC 60320 C13 male outlet — found on most PSU power cords, PDU strips or UPS battery outputs — to accept the C14 female plug.

Will the 3-pin IEC 60320 C13 male plug fit the older C13 sockets on my legacy monitor and printer?

Yes, the C13 male connector matches the 3-pin shroud inlet used on monitors, scanners and printers that follow the IEC 60320 standard.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.