Cables To Go
Cables To Go 29934 16 AWG 250V C14 to C13 computer power extension cord 8 ft
Extends power reach with a 16 AWG SJT cord rated 13 A at 250 V, IEC C14 to C13 connectors, 8 ft length
- TypeCable Connectors
- ColorBlack
- Length8 ft.
- Connector Number2
- Connector DetailConnector 1: 3-pin shroud Male (IEC320C14) Connector 2: 3-pi
- Terminal GenderMale to Female
- Extends existing power cables up to 8 ft
- 16 AWG SJT wire rated for 13 A at 250 V
- IEC 320 C14 male to C13 female connectors
- Fully moulded construction for long-term durability
- TAA compliant for government procurement
8 ft C14 to C13 Power Extension
This Cables To Go 29934 cord extends the reach between a C14 inlet and a C13 plug by eight feet. The SJT 16 AWG cable carries a 13 A, 250 V rating for standard desktop or server equipment. Fully moulded connectors and a 7.9 mm jacket provide durability in rack or desk setups. TAA compliance supports government procurement requirements.
Suits users needing extra length on existing C13
Builders who require a different connector type, a higher amperage rating, or a shorter run should look at other options. The fixed eight-foot length cannot be adjusted or coiled without slack. Installations needing angled plugs or locking mechanisms are not addressed by this design.
13 A 250 V rating on 16 AWG SJT wire
The 16 AWG conductors and 13 A limit determine the safe load for connected devices. Exceeding this rating risks overheating and cable failure. Verify that the attached equipment draws no more than 13 A at 250 V before use.
Highlights
- Extends existing power cables up to 8 ft
- 16 AWG SJT wire rated for 13 A at 250 V
- IEC 320 C14 male to C13 female connectors
- Fully moulded construction for long-term durability
- TAA compliant for government procurement
Specifications
| Brand | C2G |
|---|---|
| Model | 29934 |
| Type | Cable Connectors |
| Color | Black |
| Length | 8 ft. |
| Connector Number | 2 |
| Connector Detail | Connector 1: 3-pin shroud Male (IEC320C14) Connector 2: 3-pin shroud Female (IEC320C13) |
| Terminal Gender | Male to Female |
| Specifications | Wire Gauge and Type: SJT 16AWG x 3C Amp Rating: 13A Voltage Rating: 250V Outer Diameter: 7.9mm Weight: 0.71 lbs. Jacket Rating: Standard |
| Wire Gauge | 16 AWG |
| Features | Plug in the power cord extension cord to make your work environment more flexible and efficient. The female connector plugs directly into device, and the male connector plugs into an existing cable. This heavy-duty 16 AWG cord features a fully molded design for maximum durability and long life. Compatible for monitors, scanners, printers, and other devices that use a 3-pin shroud power connector. |
| Shipping weight | 0.32 kg |
| Package size | 406 × 127 × 25 mm |
Questions about this item
How much heat or noise does the 16 AWG 13 A cord add when it runs all day?
The cable itself produces no noise and negligible heat; it is rated for 13 A continuous at 250 V with SJT 16 AWG conductors.
What existing cable or device must I already have for the C14 male end to connect?
You need a standard IEC C13 female outlet — found on most PC power supplies, monitor bricks or UPS units — to accept the C14 plug.
Will the 7.9 mm jacket and C13/C14 connectors fit the older power strips and server gear I still use?
Yes, the fully moulded C13 female and C14 male ends match legacy IEC-320 equipment, and the 7.9 mm diameter routes through standard cable managers.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114981BTC
In stock
