We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact USB extender kit with two dongles and Cat5 cable link

Cables To Go

Cables To Go 29341 USB 1.1 Over Cat5 SuperBooster Extender Dongle Kit laptop networking

SKU CH-340M-ABK20

Extends USB 1.1 devices up to 150 feet over Cat5, Cat5e or Cat6 cable with no drivers or external power required

  • Extends USB reach up to 150 feet over Cat5 cable
  • Plug-and-play operation with no drivers or software required
  • Bus-powered design eliminates need for external power adapters
  • Compatible with any USB 1.1 host computer or peripheral
  • Base and remote dongle kit connects via standard network cable

Extends USB 1.1 up to 150 ft

This USB 1.1 extender kit uses Cat5, Cat5e or Cat6 cable to carry signals up to 150 feet between a host computer and a peripheral. It consists of a base unit and a remote unit that connect without any driver installation. The system is fully bus-powered, drawing power from the USB port so no external adapter is required.

Suits USB 1.1 peripherals at distance

Ideal for placing USB 1.1 cameras, printers, webcams, keyboards or mice beyond the standard cable limit in home or office settings. Not suitable for USB 2.0 or higher bandwidth devices, nor for installations where Ethernet cabling cannot be run between the two locations.

USB 1.1 over Cat5/Cat6 extension

The single specification that decides fit is the USB 1.1 compliance combined with Cat5, Cat5e or Cat6 transport up to 150 feet. If the peripheral requires USB 2.0 speed or the run exceeds 150 feet, this extender will not meet the requirement.

Highlights

  • Extends USB reach up to 150 feet over Cat5 cable
  • Plug-and-play operation with no drivers or software required
  • Bus-powered design eliminates need for external power adapters
  • Compatible with any USB 1.1 host computer or peripheral
  • Base and remote dongle kit connects via standard network cable

Specifications

No published specifications for this item yet.

Questions about this item

How far does the USB 1.1 signal travel over Cat5?

The extender carries USB 1.1 data up to 150 feet over a standard Cat5, Cat5e or Cat6 cable.

What physical connection does each unit require?

Each unit has a USB connector; a single Cat5, Cat5e or Cat6 patch cable (not included) links the base and remote units.

How is the kit powered and what step is often missed?

It is bus-powered with internal DC conditioning, so no external supply is needed; the step often missed is using a solid-core Cat5/5e/6 cable rather than stranded patch cord for runs near 150 feet.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.