We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 2 ft 18 AWG power extension cord with IEC C14 male to IEC C13 female connectors

Cables To Go

Cables To Go 03142 computer power cord 2FT 18 AWG IEC320C14 to IEC320C13

SKU CH-WSA5-KDKZX

A 2 ft 18 AWG extension cord connects IEC 320 C14 to IEC 320 C13 for monitors, scanners, and printers

  • Extends power reach by two feet for flexible device placement
  • 18 AWG heavy-duty wire handles monitor and printer loads safely
  • Fully molded connectors resist wear for long service life
  • IEC320 C14 to C13 shrouded fit ensures secure three-pin connection
  • TAA compliant build meets government procurement standards

Power extension for IEC devices

This 2FT power extension cord connects IEC320C14 male to IEC320C13 female connectors. It is built with 18 AWG conductors for reliable power delivery to compatible equipment. The fully molded design provides strain relief and long-term durability. It suits offices and workstations needing extra reach between a device and an existing power cord.

Suits standard 3-pin shroud equipment

Ideal for monitors, scanners, printers and similar devices that use the IEC320C13 inlet. It extends an existing cable run without replacing the original power cord. Not suitable for devices requiring a different connector type or higher current capacity than 18 AWG supports. Buyers needing a direct wall-plug cable or a different IEC standard should look elsewhere.

Extends reach by two feet

The cord adds 2FT of length to an existing power connection using 18 AWG wiring. It comfortably handles typical office peripherals within its rated capacity. Headroom ends where the current draw exceeds the 18 AWG rating or where the IEC320C13/C14 interface does not match the hardware. No additional length or gauge options are provided by this model.

Highlights

  • Extends power reach by two feet for flexible device placement
  • 18 AWG heavy-duty wire handles monitor and printer loads safely
  • Fully molded connectors resist wear for long service life
  • IEC320 C14 to C13 shrouded fit ensures secure three-pin connection
  • TAA compliant build meets government procurement standards

Specifications

No published specifications for this item yet.

Questions about this item

Will the IEC320 C13 female end on this 2 ft cord fit the C14 inlet on my existing PSU or monitor?

Yes, the C13 connector is the standard mate for any IEC320 C14 inlet found on most PC power supplies, monitors and many peripherals.

Can I chain this 18 AWG extension between my current IEC cable and the wall outlet without creating a bottleneck?

The 18 AWG conductors and fully moulded C14-to-C13 ends carry the same current rating as typical stock IEC leads, so adding this 2 ft section does not reduce the power delivery your hardware already expects.

After plugging the male C14 into my existing cord and the female C13 into the device, what quick check confirms the link is solid?

Verify both connectors seat fully with no visible gap, ensure the equipment powers on normally, and feel the cord after a few minutes — it should stay cool, indicating a sound connection.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.