We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB 2.0 cable with straight Type-A plug and right-angle Type-B plug, 10 ft long

CableMAX

CableMAX USB 2.0 A to Right Angle B 10 ft Black

SKU CH-DYE1-ET5BZ

A 10 ft shielded USB 2.0 cable with a right-angle Type-B connector for tight spaces behind printers or peripherals

  • TypeUSB 2.0 backward compatible with USB 1.1
  • Connector TypeA to Right Angle B
  • ColorBlack
  • Cable Length10 ft.
  • Length10 ft.
  • Terminal GenderA male to B male
  • 10 ft length reaches distant peripherals without extension cables
  • Right-angle B connector fits tight spaces behind printers or scanners
  • USB 2.0 compliant with 1.1 backward compatibility for legacy devices
  • Shielded 28AWG/24AWG construction reduces interference during data transfer
  • UL listed and RoHS certified for safety and environmental compliance

Straight-to-Right-Angle USB 2.0 Printer Cable

This ten-foot cable connects a standard USB Type-A host port to a right-angle Type-B device port. It suits desktop printers, scanners or external drives where the device socket faces a wall or sits in a tight recess. The 2.0 specification remains backward compatible with USB 1.1 hardware. Shielded construction helps maintain signal integrity over the full length.

Thermals Noise and Power Draw

Passive copper conductors draw no active power and generate no audible noise during data transfer. The 24 AWG power pair and 28 AWG signal pair are rated for 150 V at 80 °C, so normal bus-powered peripherals operate well within thermal limits. UL and CSA certifications confirm the cable meets recognised safety standards for continuous use.

Build Quality and Daily Implications

Molded strain reliefs on both ends resist cable-fatigue at the connector junction. A 5.0 mm UltraFlex jacket stays pliable for routing behind furniture or along skirting boards. The right-angle Type-B plug reduces protrusion depth, lowering the risk of accidental disconnection in cramped setups. RoHS compliance confirms restricted hazardous substances.

Highlights

  • 10 ft length reaches distant peripherals without extension cables
  • Right-angle B connector fits tight spaces behind printers or scanners
  • USB 2.0 compliant with 1.1 backward compatibility for legacy devices
  • Shielded 28AWG/24AWG construction reduces interference during data transfer
  • UL listed and RoHS certified for safety and environmental compliance

Specifications

BrandCableMAX
TypeUSB 2.0 backward compatible with USB 1.1
Connector TypeA to Right Angle B
ColorBlack
Cable Length10 ft.
Length10 ft.
Terminal GenderA male to B male
Specifications28AWG/1P+24AWG/2C
ShieldingYes

Questions about this item

How do I plug in the right-angle B connector without stressing the port?

Insert the straight Type-A end into the host first, then guide the right-angle Type-B plug into the device so the cable runs parallel to the equipment; forcing it perpendicular bends the internal 28AWG/24AWG conductors.

When should I replace this cable if the shielding degrades?

Replace it if the outer jacket cracks, the over-moulded strain relief splits, or intermittent disconnects appear during printing — the UL-listed 28AWG/1P+24AWG/2C construction cannot be repaired.

What length limit causes signal errors on long print jobs?

The 10 ft length is the maximum offered for this USB 2.0 High-Speed design; longer runs exceed the specification timing budget and introduce errors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.