We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCI card with two serial ports, one DB9 and one RJ45, low-profile bracket included

CableMAX

CableMAX IO-102 Dual Port RS-232 PCI Expansion Card

SKU CH-G85A-WA84T

Adds two RS-232 serial ports via PCI with 128-byte FIFO and 920 Kbps throughput

  • TypePCI to Serial Port Card
  • External Ports2 x Serial Ports
  • Operating Systems SupportedWin 7 Win 8/8.1 Win Vista Win XP
  • Adds two RS-232 ports to a PCI system
  • Oxford 16C950 UART enables 920 Kbps serial throughput
  • 128-byte FIFO buffers reduce CPU overhead per port
  • Jumper-selectable 5 V output powers scanners and POS displays
  • Low-profile and standard brackets fit either chassis

Add two serial ports to a PCI slot

This CableMAX IO-102 card adds one DB9 and one 10-pin RJ45 RS-232 port through a 32-bit PCI 3.0 interface. It uses an Oxford 16C950 UART with a 128-byte FIFO per channel and supports baud rates up to 920 Kbps. A 10-pin RJ45 to DB9 bridge cable is included in the box.

Suits legacy equipment that needs 5 V power

Industrial scanners, POS displays and older serial devices that draw 5 V from the port can run directly from this card via jumper-configurable power output. The low-profile and full-height brackets let it fit either chassis type. Systems running operating systems newer than Windows 8.1 will not have built-in driver support.

Oxford 16C950 UART with 5 V selectable output

The on-board 16C950 UART provides hardware flow control and deep FIFO buffers for reliable high-speed serial communication. Jumpers on the PCB switch the 5 V supply on or off for each port independently. This single feature determines whether your peripheral can operate without an external power adapter.

Highlights

  • Adds two RS-232 ports to a PCI system
  • Oxford 16C950 UART enables 920 Kbps serial throughput
  • 128-byte FIFO buffers reduce CPU overhead per port
  • Jumper-selectable 5 V output powers scanners and POS displays
  • Low-profile and standard brackets fit either chassis

Specifications

ModelIO-102
TypePCI to Serial Port Card
External Ports2 x Serial Ports
Operating Systems SupportedWin 7 Win 8/8.1 Win Vista Win XP

Questions about this item

What does the 32-bit PCI 3.0 interface cap the card at in practice?

The 32-bit PCI 3.0 bus provides enough bandwidth for both serial ports to run at their maximum 920 Kbps simultaneously without bottleneck.

What brackets and cable are needed to fit the IO-102 into a standard-height chassis?

A standard-height bracket is included; swap the low-profile bracket using the two mounting screws, then connect the supplied 10-pin RJ45-to-DB9M bridge cable to the on-board RJ45 header.

Which jumper setting is commonly missed when enabling 5 V output on the DB9 port?

Move the power-select jumper for the DB9 port to the 5 V position (silk-screened on the PCB) before installing the card; the port defaults to standard RS-232 levels otherwise.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.