CableDeconn
CableDeconn Sata SAS Cable 6Gbps 1M 6pcs/Set
A set of six Sata and SAS cables supports 6 Gbps transfers over one metre lengths
- Connector TypeUSB C to USB C
- Six cables keep multiple drives tidy in one case
- Braided nylon sleeve improves airflow around each cable
- 6 Gbps transfer rate handles high-speed Sata and SAS traffic
- One-metre length reaches drives across full-size server chassis
- 18 month warranty backs long-term reliability
Six-piece SATA/SAS cable set
This set contains six cables that each carry SATA and SAS signals at up to 6 Gbps. They are intended for connecting multichannel removable hard drives inside a computer case or any device with a standard 7-pin SATA port. The cables are new and measure one metre in length. A nylon braided sleeve keeps the bundle tidy and promotes airflow.
Replaces loose or shorter SATA leads
Use these when existing cables are too short, lack SAS support or create clutter that restricts ventilation. The 6 Gbps rating matches the SATA 3.0 and SAS 2.0 specifications, so the upgrade is worthwhile when current wiring limits drive throughput or makes drive swaps difficult. The six-pack covers multiple bays in a single purchase.
Sustained transfer at 6 Gbps
Under continuous load the cables maintain the rated 6 Gbps bandwidth without throttling. The braided construction resists kinking and helps dissipate heat during long rebuilds or backups. Connectors are moulded for repeated insertion cycles in server environments. An 18-month warranty backs the build quality.
Highlights
- Six cables keep multiple drives tidy in one case
- Braided nylon sleeve improves airflow around each cable
- 6 Gbps transfer rate handles high-speed Sata and SAS traffic
- One-metre length reaches drives across full-size server chassis
- 18 month warranty backs long-term reliability
Specifications
| Connector Type | USB C to USB C |
|---|
Questions about this item
What length are the Sata cables in this six-piece set?
Each cable measures one metre, giving you 1M of reach for internal drive connections.
How do you attach the Sata connectors to the motherboard and drive?
Align the L-shaped key on each 7-pin plug with the socket, press straight in until it clicks, and avoid forcing the cable at a sharp angle.
When should the braided Sata cables be replaced?
Replace them if the nylon sheath frays, a connector feels loose, or data errors appear after 18 months of continuous server use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



