We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini SAS SFF-8087 plug to four right-angle SATA connectors on a .5 m cable

CableDeconn

CableDeconn Mini SAS SFF-8087 to 4 SATA 90° cable .5m

SKU CH-H1KK-EMH0K

Connects a 36-pin SFF-8087 port to four right-angle SATA drives at 6 GB/s over 0.5 m

  • Connector TypeUSB C to USB C
  • 6 GB/s bandwidth supports fast SAS and SATA storage transfers
  • 90-degree SATA connectors ease routing in tight drive bays
  • 36-pin SFF-8087 plug fans out to four 7-pin SATA ports
  • 5 m length keeps cable runs short and tidy
  • Tinned-copper drain wire and 30 AWG conductors reduce signal loss

Mini SAS SFF-8087 fan-out cable

This cable connects a single 36-pin Mini SAS SFF-8087 port to four right-angle 7-pin SATA drives. It suits builders adding multiple hard disks or SSDs to a RAID controller or HBA inside a server or workstation chassis. The 0.5 metre length keeps routing tidy in dense drive cages.

Replaces loose SATA cables from controller

Use this fan-out when a controller provides only Mini SAS ports and you need to attach four SATA devices directly. The jump is worth it when cable clutter blocks airflow or when the backplane lacks native SATA connectors. Each leg ends in a 90-degree plug for tight drive bays.

Simple push-on installation

Push the Mini SAS end into the controller until it clicks, then seat each right-angle SATA connector onto the drive ports. The 30 AWG tinned copper drain wire handles grounding. What usually goes wrong is forcing a connector upside-down or not fully seating the latch, which breaks the 6GB/s link.

Highlights

  • 6 GB/s bandwidth supports fast SAS and SATA storage transfers
  • 90-degree SATA connectors ease routing in tight drive bays
  • 36-pin SFF-8087 plug fans out to four 7-pin SATA ports
  • 5 m length keeps cable runs short and tidy
  • Tinned-copper drain wire and 30 AWG conductors reduce signal loss

Specifications

Connector TypeUSB C to USB C

Questions about this item

What clearance does the 90-degree SATA connector need?

The right-angle 7-pin SATA ends require enough space behind the drive for the 90-degree bend; measure from the drive edge to the chassis wall before routing.

Which end plugs in first during installation?

Seat the 36-pin SFF-8087 mini-SAS connector into the controller or backplane first, then attach each 7-pin SATA plug to the target drives.

When should the cable be replaced?

Replace if the tinned-copper drain wire or 30 AWG conductors show damage, or if 6 Gb/s bandwidth errors appear on connected drives.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.