CableDeconn
CableDeconn Dual Mini SAS SFF-8088 to SFF-8087 Adapter PCI Bracket
Connects two external 26-pin SFF-8088 ports to internal 36-pin SFF-8087 connectors using a full-height PCI bracket for 6 Gb/s SAS links
- Connector TypeUSB C to USB C
- External 26-pin SFF-8088 host connection supported
- Internal 36-pin SFF-8087 device connection supported
- Up to 6GB/s SAS data transfer rate enabled
- Dual-port adapter with full PCI bracket mounting
- 18-month worry-free period with lifetime technical support
Dual Mini SAS Adapter Bracket
The CableDeconn bracket adapts two external SFF-8088 26-pin host connectors to internal SFF-8087 36-pin device connectors. It fits a standard PCI slot profile for secure mounting inside a chassis. The adapter targets builders who need to connect external SAS enclosures to an internal controller. It is not suited for direct drive attachment without a backplane.
Thermals Noise Power
The passive adapter draws no power and adds no active cooling or audible noise to the system. Signal integrity is maintained for the rated 6GB/s Mini SAS data transfer rate across both ports. No external power connection is required for operation. Thermal load depends entirely on the host controller and attached enclosures.
Upgrade Path
This bracket replaces loose cable assemblies or single-port brackets when a second external SAS link is needed. The jump is worth it when moving from a single external port to dual-port redundancy or bandwidth aggregation. It does not upgrade the controller speed itself. Buyers who need more than two external links must look elsewhere.
Highlights
- External 26-pin SFF-8088 host connection supported
- Internal 36-pin SFF-8087 device connection supported
- Up to 6GB/s SAS data transfer rate enabled
- Dual-port adapter with full PCI bracket mounting
- 18-month worry-free period with lifetime technical support
Specifications
| Connector Type | USB C to USB C |
|---|
Questions about this item
How do I install the dual SFF-8088 to SFF-8087 adapter bracket into a PCI slot, and what step is often missed?
Secure the full-profile bracket to the chassis with a screw after inserting the 26-pin and 36-pin connectors; the step often missed is tightening that bracket screw before cabling.
What maintenance will the SFF-8087 and SFF-8088 connectors need over time?
Inspect the 26-pin and 36-pin contacts for dust or bent pins periodically; reseat cables if SAS link errors appear, otherwise no scheduled replacement is required.
What is the first limit reached during sustained transfers with this 6GB/s Mini SAS adapter?
The 6GB/s Mini SAS data transfer rate is the ceiling; sustained workloads will saturate that bandwidth before the bracket or connectors become a bottleneck.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



