CableCreation
CableCreation XLR 3 Pin Female to 6.35mm Female Audio Adapter Silver
Metal XLR 3-pin female to 6.35 mm stereo female adapter for microphones, monitors and PA systems
- Changer TypeOther
- Connects XLR microphones to 6.35mm inputs
- Metal housing protects signal integrity
- Adapts 3-pin female XLR to stereo 6.35mm female
- Suits studio monitors, PA systems and audio interfaces
- Two-year manufacturer warranty included
Signal conversion
This adapter connects an XLR 3-pin female plug to a 6.35 mm female socket. It lets you join balanced microphone cables or professional audio gear to equipment that uses quarter-inch stereo jacks. The metal housing protects the contacts during repeated plugging and unplugging. It is suited for studio, stage and home-recording setups.
Sustained reliability
The all-metal shell resists bending and shields the signal path from handling noise during long sessions. Gold-plated pins maintain low contact resistance even after hundreds of mating cycles. No active electronics are present, so performance does not degrade with heat or extended use. The passive design adds no latency or colouration to the audio path.
Installation notes
Simply push the XLR connector into one end and the 6.35 mm plug into the other until each clicks. The only common issue is forgetting that this is a gender changer, not a level converter; it will not turn a line-level output into a microphone-level signal. Ensure both cables are wired for stereo if you need a balanced stereo connection.
Highlights
- Connects XLR microphones to 6.35mm inputs
- Metal housing protects signal integrity
- Adapts 3-pin female XLR to stereo 6.35mm female
- Suits studio monitors, PA systems and audio interfaces
- Two-year manufacturer warranty included
Specifications
| Changer Type | Other |
|---|
Questions about this item
Does the metal housing of this XLR-to-6.35mm adapter generate any heat or electrical noise during extended sessions?
No, it is a passive metal adapter with no active electronics, so it produces zero heat and adds no electrical noise to the signal path.
Which cables or devices must I already own to use this female-to-female adapter?
You need an XLR 3-pin male cable and a separate 6.35mm male plug cable or device to bridge between them.
Will this adapter work with older XLR microphones or PA gear that use the standard 3-pin layout?
Yes, it follows the standard XLR 3-pin pinout, so it connects legacy microphones, mixers or PA equipment to 6.35mm inputs without wiring issues.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



